• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

LCR W.I.P Update K04 Hybrid- F23 Here, mini review page 50

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Part1

Righto folks, sorry haven’t updated in a few weeks I have been busy with stuff.Still no sign of the new setup :( but I have plenty of other stuff to keep me busy.My clutch finally started to let go after about 7k miles on my Hybrid setup, not bad really when you consider the abuse it got, I have decided to go for a DMF again and a uprated Sachs clutch, I want to keep the OEM feel and after a lot of reading around I think this will do the trick nicely, I plan to order it and can hopefully do the setup start to finish for about 1k, I will keep you posted.
I have done tons of small work on the car, bits and bobs here and there and made sure I snapped a few pictures along the way.

So here we go:
1: New Genesis 550cc injectors with harnesses, waiting on delivery.
2: New MAF, airflow are back to consistent 250+ reading.
3: Setup of super low mileage Eiback Pro-Street-S coilover, mounts etc.. installed.
4: New AutoMeter Sport-Comp II gauage installed.
5: B-Hague Headrest camera mount and Iphone adapter.
6: Refurbed my Liguid Gauge vent install.
7: Set of Vredestein Ultra Sessanta’s, happy days.
8: New WMI nozzle mount. update tomorrow.


1. We’ll start with the Injectors, I am currently running my 440cc injectors are 4 bar, so about 510cc in flow altogether but I can’t help feelling in the back of my mind the fuel pump is under pressure, 4bar FPR + 1.7 bar boost is 5.7bar fuel rail pressure.When I get the 550cc installed I will go back to the 3 bar FPR and give my fuel pump a break. After reading tons of stuff on the Genesis 550cc injectors they seem to be the favoured injector for tuners with great reviews, mine are enroute at the moment, no doubt they are sitting in customs while they figure out the import tax BS. Will have to tweak the remap for these bad boys, worth it though.

http://www.ecstuning.com/Audi-TT_MKI-Quattro-225HP/Engine/Fuel/ES9863/

2. My G/S was slowly decreasing over the past few weeks, so I bought a new MAF and they are back to a consistent 250g/s+ at 7k rpm, my last MAF only lasted 8months, I am slightly annoyed at this. As you can see from the Dyno picture I found out my rev limiter is about 7500rpm, LOL.

fb73ab2b.jpg


3. I was lucky enough to pick up a set of Eibach coilovers for next to nothing, they had 2k miles on them and were solid. I suspected my Jamex coilovers were fcuked, I was right when I got them off the car they were in shite, especially the left one, zero rebound. I am happy with the Eibach, the ride is nice, not to harsh, very nice on cornering. I did the usual install, mount, strut nuts etc… Some pic’s from the install:

Old Jamex, fit for the bin.
074c44b0.jpg


New Eibach ready to go in.
30ada497.jpg


In.
b00fe00d.jpg


Torqued up.
66faf646.jpg


My hands were to dirty to take pic’s of the rear install, but you get the idea.

4. I have owened about 4 Boost gauges over the last while, all reading in bar and all low end.I tested them all while I simultaneously connected them to a line and pressurised it, no surprise they all read different, some high some low, all wrong though.

I decided to fork out abit of extra cash on a tried and tested gauge, so I bought an AutoMeter Sport-Comp II, the second I held this in my hand I could feel the superior build quality and its super accurate. In addition i went for the PSI this time, it really helps tune the boost better when using an MBC, I am very happy with this purchase.

75d79e3c.jpg

1997c60a.jpg


5. B-hague Camera mount, I got sick of trying to hold my iPhone steady while trying to record, not to mention its dangerous and just stupid. This piece of kit is really slick, I still have a bit of tweaking to do but overall all I am chuffed with it.

I put up some vids on my Youtube channel, check’em out.

http://www.youtube.com/user/RobbieRolex

4e77007f.jpg

68c92c3e.jpg


Part 2: below
 
Last edited:

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Part 2

6. My Liquid Gauge install with feelling abit sorry for itself, I had an awful time trying to mount it in the vent when I first installed it, I have since found Race diagnostics sent out a dodgy batch that moulding were wrong on.I bought a second hand vent for a fiver and also sanded down my Liquid gauge surround and resprayed it.It came out well it think.
Before:
IMG_0640.jpg

IMG_0644.jpg

Vent:
IMG_0643.jpg

After:
IMG_0651-1.jpg

IMG_0658.jpg



7. Vredestein Ultrac Sessanta = Awesome

That’s it for now, I have some WMI updates tomorrow which I will post.Hope you’re not to bored by now.

P.S I made a new banner for my signature, all i have to say is PhotoShop is a proper pain to use when you haven't got a clue about it, still i am happy.
 
Last edited:

8bit

Active Member
Feb 11, 2010
3,401
3
Aberdeen
Nice list of goodies there :) Did you fit the coilovers yourself aye?

Looking forward to a fresh set of Ultrac Sessantas myself too, current ones will probably be shot after the winter - how'd you find them in the snow?
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Nice list of goodies there :) Did you fit the coilovers yourself aye?

Looking forward to a fresh set of Ultrac Sessantas myself too, current ones will probably be shot after the winter - how'd you find them in the snow?

Thats the word, "goodies" i love goodies and Yeah, i fitted the coilover myself, coilovers are super easy if you have the right tools and i won't trust the local garages, the don't seem to recognise torque values, just the good and tight rule.:lol:

I haven't used the Ultrac in Snow, but to be fair i am not expecting much, only winter tyres(or chains) can cope with snow IMO, they are awesome in the wet, they give got feedback, better then the Potenza PE050 i had before which didn't cope with the wet and had very poor feedback on corning and don't break traction so easy, granted they are new but my previous tyres did not hold traction this good when they were wet.

good update, i also love how the inside of your car resembles more of a light aircraft at night rather than a car, looks ace ;)

:lol: As long as it doesn't take off one of these days.
 
Last edited:

8bit

Active Member
Feb 11, 2010
3,401
3
Aberdeen
I haven't used the Ultrac in Snow, but to be fair i am not expecting much, only winter tyres(or chains) can cope with snow IMO, they are awesome in the wet, they give got feedback, better then the Potenza PE050 i had before which didn't cope with the wet and had very poor feedback on corning.

I used them last winter, to be fair they were a lot better than I was expecting, I never got stuck once. That said, you're running about another 100bhp and the same again in lb/ft than my car tho so see how you go ;) I looked at getting some winter tyres but I struggled to get anything half decent for less than about £600 for a set, bad times.
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Good to know they were decent in the snow, i couldnt be bothered getting winter tyres just yet, in fairness the last few years have been freak winters in Ireland anyway and it doesnt last to long, i just use the wife's Laguna, its big, heavy and its seems to cope better.
 

Willie

LCR Track car
Aug 6, 2004
8,939
1
Sunny Scotland
I used them last winter, to be fair they were a lot better than I was expecting, I never got stuck once. That said, you're running about another 100bhp and the same again in lb/ft than my car tho so see how you go ;) I looked at getting some winter tyres but I struggled to get anything half decent for less than about £600 for a set, bad times.

Sorry to hijack but this should help all.
I've just bought Nancang SV2 in 235-40-18 for my Audi A4.
These come highly recommended and were only £99.40 each delivered.

Anyway hope this turbo set up work without surge for you.
 

t0m

LCR 225
Apr 29, 2007
8,133
7
Kent
Awesome Robbie! Great updates there mate and very well done with the work you've done.

Really do love this car :love:
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Sorry to hijack but this should help all.
I've just bought Nancang SV2 in 235-40-18 for my Audi A4.
These come highly recommended and were only £99.40 each delivered.

Anyway hope this turbo set up work without surge for you.

Cheers Willie, those tyres lookin interesting, pity us LCR boys can't put on sets of steel wheels for the bad weather, guess thats one of the prices you pay for Brembo's.

Awesome Robbie! Great updates there mate and very well done with the work you've done.

Really do love this car :love:

Thanks t0m, i see your car is coming along nicely, good job on the calipers, mine are due for another refurb as this stage.;)
 
Last edited:

8bit

Active Member
Feb 11, 2010
3,401
3
Aberdeen
Cheers Willie, those tyres lookin interesting, pity us LCR boys can't put on sets of steel wheels for the bad weather, guess thats one of the prices you pay for Brembo's.

You probably could, you'd just need a big f**k off spacer on each wheel.
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Another dead TB

Well today i killed another throttle body from injecting W/M pre TB, what a complete bollix, there has to be away to stop it getting into the TB electric.:(
 

Willie

LCR Track car
Aug 6, 2004
8,939
1
Sunny Scotland
Cheers Willie, those tyres lookin interesting, pity us LCR boys can't put on sets of steel wheels for the bad weather, guess thats one of the prices you pay for Brembo's
For a start I used to swap the tyres on my OEM wheels then I picked up a set of aftermarket alloys.
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
WTF is this week, national WMI failure week, first WMI killed a TB on me, thats fine i am aware of this risk but now the pump has decided to stop working, i checked all the connections, fuses, had the multi meter out, all fine, controller acts normal, even tried to short it out to get it to run, but its dead.THis happened the pump before so i took it to bits and when i put it back together it worked fine, its like its stuck or something.

Just as well i always check my Liquid guage before i go for a blast. This devil's own kit is coming off the car, i am to suspicious of the pump/kit now and it doesn't have a failsafe.

Well pissed off.
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Well i bite the bullet and ordered up a new SouthBend clutch, this clutch is for use with the OEM DMF and is rated to 450lb/ft which i am thinking should be enough and from the reviews i've read it doesn't break you leg in traffic and feels close to stock, i guess the proof is in the pudding.

Should be getting fitted in the few weeks.

http://www.dbcperformance.com/K70287_HD_OFE_p/k70287-hd-ofe.htm

While i was at it i also ordered up a a new induction kit, while my Jetex filter is fine the connectors/joiners are not imo, the air travel over these uneven surfaces must cause unwanted turbulance, so i am going to give a Velocity stack a go, they are widespread in the USA and the idea is to have smooth uniformed airflow in a short ram type intake.

We will see if it does anything, i may be just nit picking now.

http://www.bpinitiatives.com/filterkits.php#asm30601

http://en.wikipedia.org/wiki/Velocity_stack


I need to get out now and sort this F'ing WMI out.!
 
Last edited:
Adrian Flux insurance services - discount for forum members.