Lcr rebuild no 2 :)

[paul-murphys]

Legend mate! You arnt half cracking on lol picked up my flywheel from duhram tonight, shoulda arranged to drop in on the way back. Only occurred to me when I saw catterik garrison turn off! Haha

hi mate should have gave me a txt there ready when ever you want them, they look so small compared to the green ones i have, what size are your ones?

and i got to get a part so its delayed me till i can get it need to find somewhere local that sell stuff, where you usually go?

 

[paul-murphys]

good work there paul,keep it going will be well worth all the 16hour shifts.

should be done rich, only needing the part for coolant hoses has slowed me down apart from that i was doing well lol, will be on the road tue i think as im away for the weekend so cant work on car

 

[Scott-o]

hi mate should have gave me a txt there ready when ever you want them, they look so small compared to the green ones i have, what size are your ones?

and i got to get a part so its delayed me till i can get it need to find somewhere local that sell stuff, where you usually go?

Was just to pop in for a chat really, didn't realise they were ready up here haha and not sure on size but the lcr ones are bigger. Ours must be puny!

Usually order parts from sere motors off here and usually next day. If you want to go in person then there is the parts specialist up teeside that sell genuine parts. That's who the garage I use gets parts off.

When you heading back down?

 

[paul-murphys]

well this weekend im in wingate then hoping to drive back down to cov on the tue or wed which ever day im ready to be honest, cant wait lol,

and might just be the lcr ones spray more, you need spacers or anything? and i would order off serne its the mail to camps is crap., will see if anywhere open at the weekend where im stayin as thats keeping the car off the road at the min

when you free next week

 

[Scott-o]

Direct fit apparently I hope so anyway! I'll hopefully hear back from that bloke about the maf and forge about an adapter hose. Then it's literally turbo and then I've got everything!

Be free on Monday night probably then weds or Thursday. Just any night really. Work early till late though so never free during the day

Shame post is crap, David woulda sorted you out!

 

[paul-murphys]

i going to have a go at glueing it lol, should work as its only part of the plastic coolant hose then will buy a new one when in covenry as easier to source there,
will give you a txt monday if you want mate, than can sort out you getting the injectors, and hopefully i will have had my car fired up cant wait now so excited lol,

 

[Scott-o]

Yeh spot on mate don't mind a run out over your way haha roads can be good fun

Should be alright then, fingers crossed!

 

[cupra.al]

lol its all good and i have saved myself thousands of pounds from being a mechanic doing all this work myself, you do all your work on your own car?

yeah i always do everything on my car so i did get something out the 3 years at college.
looks like your wasting no time with get this car up and running.
where are you getting it mapped?

 

[paul-murphys]

yeah i always do everything on my car so i did get something out the 3 years at college.
looks like your wasting no time with get this car up and running.
where are you getting it mapped?

hi mate got the downpipe on today but due to the design of the manifold i had to drop the turbo down a bit to gt it to line up, at the minute waiting on some parts before i can do anymore, also on my boost pipes ive had a bead welded onto them so now should have no problems with them popping off

cars getting mapped by company near me. called r.t.e.c.h so look forward to seeing what they can do, im hoping for 320 torque and bhp with the methanol, hybrid and the high flow mani. we will see

you got any plans for your car?

 

[brad1]

r-tec, dont do it, ive heard bad things about them plus there maps aint all that. Get badger bill off here to map it

 

[cupra-rich]

r-tec, dont do it, ive heard bad things about them plus there maps aint all that. Get badger bill off here to map it

hmmm,wots the bad things you heard??

 

[Murdered LCR]

2nd that get a decent map

 

[brad1]

hmmm,wots the bad things you heard??

They blew 2 turbos up on my mates golf lol, plus my other mate has a ED30 which has full exhaust and a stage 2 map by them and its no quicker than my LCR till 100 and then it only pulls away ever so slightly

 

[cupra-rich]

They blew 2 turbos up on my mates golf lol, plus my other mate has a ED30 which has full exhaust and a stage 2 map by them and its no quicker than my LCR

don't wanna spam up paul's thread, but a shame their not allowed on here to explain the whole situation on this. as i'm sure there is two side's to this.

will have to wait and see if they can do any better on paul's car

i know paul will be taking this to various dyno's including bill's so we can all have a good idea on how r- t.e.c.h. maps perform.

 

[h7 cya]

all that work on the engine mate, i think it would pay off for a custom map from a reputable mapper.

 

[Ed30]

I drive the ed30 that nick @ r tech mapped. And he has been nothing but helpful. Diagnosed a fault with my pcv system when i was loosing oil. Gave me good advice on how to get the best power out of my engine. Didnt lie about what to expect and make stupid claims about silly figures. And its run perfect ever since. And i dont remember u keepin up brad. Well actually once...when u was on your own and i had 4 fully grown people in mine about 290kgs extra weight.. And even you couldnt ge away! And when it was me and bendox we pulled about 6 or 7 lengths down the dual carrigeway. 2.0tfsi ftw lol. And ive not got fuel pump and intercooler for stage 2+ yet either. Id recomend r tech to anyone.only If you want a great friendly professional service that is.

 

[brad1]

I drive the ed30 that nick @ r tech mapped. And he has been nothing but helpful. Diagnosed a fault with my pcv system when i was loosing oil. Gave me good advice on how to get the best power out of my engine. Didnt lie about what to expect and make stupid claims about silly figures. And its run perfect ever since. And i dont remember u keepin up brad. Well actually once...when u was on your own and i had 4 fully grown people in mine about 290kgs extra weight.. And even you couldnt ge away! And when it was me and bendox we pulled about 6 or 7 lengths down the dual carrigeway. 2.0tfsi ftw lol. And ive not got fuel pump and intercooler for stage 2+ yet either. Id recomend r tech to anyone.only If you want a great friendly professional service that is.

You need Revo, end of, Waynes K1 on just stage 1 at 347bhp was quicker than yours, sorry to say it but it needs Revo power. Look at most of the stage 2 and stage 2 plus cupras on here, they all run Revo, bar a couple. If i was in your shoes the car would have gone to AmD for Revo boost Anyway enough of cluttering up someones thread, Paul-Murphys...go badger bill as he knows how to get the real power from these hybrids

 

[Ed30]

R tec do revo anyway and im sure theirs will be the same as amd.im not cloggin up the thread,just giving advice from personal experience. And i found r tech to be as helpful any. If not more.

 

[brad1]

R tec do revo anyway and im sure theirs will be the same as amd.im not cloggin up the thread,just giving advice from personal experience. And i found r tech to be as helpful any. If not more.

Whats the point of going right up to them when AmD are just up the road and just as helpful, if not more to go out there way to help there customers like they did for me today Anyway everyone has there own opinion and opinions are what count at the end of the day. If you ask me, go badger bill for the mapping on this cupra R

 

[adiamo]

Beautifull Car