Alex's - Candy White Mk4 Ibiza - SOLDD!!! :(

[Alex 17]

Liking the grill Not feeling the sticker there tbh mate.

Front or back? I Quite like the front but not sure on the back.. They all end up comeing off after about a week anyway lol

 

[Chino_UK]

Back mainly, looks a it cluttered? Stickers are tricky little beggars, getting the position and quantity right are key lol

 

[ScottHmk4]

carbon boot S??

 

[Chino_UK]

carbon boot S??

That could work. Just have to be carful not to have too much going on? Keep it 'clean' as such?

 

[BigWill]

I like it without the centre grill in at all

 

[Alex 17]

Is it not an absoloute **** to get to the rear s?

 

[Veyron]

Is it not an absoloute **** to get to the rear s?

Depends how much of a perfectionist you are

 

[ScottHmk4]

think i have a spare boot s wont be needing it if your wanting it to play with

 

[Alex 17]

Depends how much of a perfectionist you are

A big one

think i have a spare boot s wont be needing it if your wanting it to play with

Im sure mine would do just have to get too it , is there a guide how to take it off / appart?

 

[adam kelly]

Easy to do remove boot trim.Then think 4 nuts and it come out

 

[ScottHmk4]

once the boot S section is out there is a long pin which holds the 's' in place and you push the pin through and the S falls out

 

[Scott-o]

Can you actually get the chrome 's' bit off then? Might order a spare one up to get sprayed

 

[Scott-o]

and shoulda kept the grill how i did it all in proper carbon only needed a quick sand and re-laquer:

Looking forward to seeing it with the cupra bumper on, will look mint! Get the undertray off and some 185-35-17 tyres on and lower front some more to make up for the lack of splitter haha

 

[Alex 17]

once the boot S section is out there is a long pin which holds the 's' in place and you push the pin through and the S falls out

Ah right , Ill have a go some day... Dont wana go ott with paint/carbon

Can you actually get the chrome 's' bit off then? Might order a spare one up to get sprayed

The front or back? Both come off but the backs alot harder

and shoulda kept the grill how i did it all in proper carbon only needed a quick sand and re-laquer:

Looking forward to seeing it with the cupra bumper on, will look mint! Get the undertray off and some 185-35-17 tyres on and lower front some more to make up for the lack of splitter haha

Did try and keep the grill how it was , when we sanded it was too thin a layer that you could see the chrome under.. The grills been re sanded/ laquered but its hardly perfect.. Loooks good still though ..

Same.. The modifying of the bumper is 80 percent done with the sanding.. Another hour or so and should be done... I've got a splitter .. Its screwed down to some wood after i heat gunned it to match the shape of the cupra bumper following the template i made useing the bumper

 

[Scott-o]

eh, how much sanding did you do?lol it was a good 2-3mm thick the carbon haha

Not keen with the splitters on cupra bumpers, looks daft in the middle cos the bumper extends down either side. Id you manage to sus this problem you can do mine haha

 

[Alex 17]

eh, how much sanding did you do?lol it was a good 2-3mm thick the carbon haha

Not keen with the splitters on cupra bumpers, looks daft in the middle cos the bumper extends down either side. Id you manage to sus this problem you can do mine haha

It wasnt that it was the edges that seemed to be thin hard to explain really.. Just didn't work out right.. Same with the surround but i managed to get that done to a good look

Im not a fan either unless done right.. Ill see how this one goes probably be modified to high hevan by the time im finished.. May even cut it in half and plastic weld then re smooth it together

Remind me i need to somehow get those fogs of you sometime , Might have to send someone for them since i cant drive lol

 

[Scott-o]

ill be home at the weekend like but in leeds this week and next during the week. You need a grow a pair and get driving

Yeh seen someone bought two, split them etc and sorted them so they fit the cupra bumper. Too much effort though

 

[Alex 17]

ill be home at the weekend like but in leeds this week and next during the week. You need a grow a pair and get driving

Yeh seen someone bought two, split them etc and sorted them so they fit the cupra bumper. Too much effort though

Next weekend should be fine , no hurry since i cant drive!

I would love to drive and i can but parents wont let me since my insurance wont cover me.. **** really lol ..

Ahh who cares abit of effort goes along way .. Should be able to modify this one in 1 peice anyway .. just lots of cutting heating and bending and possibly wrapping..

 

[Aimez]

Like the S badge actually, Nor keen on rear custom code sticker either tbh it will get ruined by the exhaust anyway no doubt your car being de-badged it just looks wrong with stickers on IMO but up to you obviously.
Ha my Dad hates the fact I have 2 bumpers and exhaust and a box of standard bits in the garage oh yeh and 5 wheels and boxes of detailing stuff he keeps saying what you gonna do with them why don't you sell them. I try not to mentioned all the crap golf paraphernalia he keeps!

 

[Alex 17]

Progress here 80 percent done ..

You can see just how much you have to sand to get it down to the same level.. Loads of work involved...

And ta - da .. So far...