TRAX @ Silver stone - are you going??

t32er

Guest
thank you mate, the main bit for me is the pressure test if any thing.... i have a propper judder problem and i can see ther is a prob as boost gauge sits at -20 on tick over, but the gauge goes to -30, it should be sat there really
 

Pyro

Guest
Nope should sit at 20-22 tex so your vacs ok if you had vac leak it would sit lower but that don't mean you have boost leak just a leak in the vacuum hoses ;) witch you don't as it sit just fine :)
 

Pyro

Guest
I'm gunna try get catch can done asap but don't get payed till Thursday :(
 

t32er

Guest
sam - when i rev on tick over and let it spool back down it drops to -30 then creeps back up, also i can hear air from some where on the come down, just need to find the fooker, when its just started its jumpy as heck on low rev then it clears but when i nail it, it becomes jumpy again
 

Pyro

Guest
IMO the PVC system won't affect boost well not slot anyway ;) it's oil breather system
 

Pyro

Guest
Does sound like a leak but I think mine does same when I rev on idle but can't remember lol have you tried new maf??
 

Pyro

Guest
Yea I know wat you mean I think I got on and wanna find it I know I got a split PVC pipe :(
 

Pyro

Guest
iv not tryd a maf no mate to pricy to buy one then it not be the maf

If your running open cone then your gunna need one sooner or later mate if it's not that then swap it back and when I does go you have a spare :)
 

t32er

Guest
will give it ago tomoz mark, fingers crossed it is, would i be able to drive far with it unplugged??
 

Seat Gooner

A.K.A Mark
Feb 28, 2009
1,952
0
Wisbech
yeah dont go to far will cause a few problems with lights just take it up the road and back you will know then

i got a green pan and smooth box
 
Genuine SEAT Parts and Accessories.