breather system part number?

[Pyro]

hello guys does any1 know the part number for these two pipes???

 

[jonesy118]

First picture is: 06A133783G if it's the 90 deg bend you need.

second picture is: 06A103213AF if a cupra 180, if it's a cupraR (210 or 25) you need 06A103213AK

Just replaced mine with some 19mm silicone instead

 

[Pyro]

cheers buddy its 180 AUQ might just replace with silicone but there all bends and whatnot would like a silicone kit that replsaces but cant find one anywere

 

[sambryant]

sam i had the same pipes split look!!!




best thing to do is get a catch can and get rid of all that pipe work, the second pic, that pipe cost £40 thats more that a catch can

 

[Pyro]

see i wanna do catch can but cant find a 19mm one on the bay

 

[sambryant]

mines a 15mm toyo can, most are 15mm and you need to make them fit. i heated up some 8mm silicone and slid it over the outlets, nice tight fit with the 19mm hose now

 

[jonesy118]

the second pipe can easily be swapped for a 19mm silicone straight length. Here's mine. Failed upper and lower breather so far now!!

 

[Pyro]

that looks good where did you get the Tpice from??

 

[sambryant]

there you go sam, u can see the silicone on the outlets

 

[jonesy118]

volks bits on eBay. Gone up a bit since I got mine.. mine was £20 delivered I think. Much more rigid than the original

 

[oldskool]

I have the lower on in the classifieds if youre interested, just sold the top one

 

[Pyro]

I have the lower on in the classifieds if youre interested, just sold the top one

oi saw that erlier actuly but had to go out so couldnt PM ya how much wsa it again??

 

[Pyro]

sam any chance of a likny?

 

[sambryant]

here you go
http://cgi.ebay.co.uk/Toyota-MR2-St...83903115?pt=UK_CarsParts_Vehicles_CarParts_SM

 

[Pyro]

legend cheers mushty ill be ordering that payday so i need a little bit of 8mm and how many meters of 19mm????

 

[sambryant]

you can use the hose that they supply if you like m8, i used my silicone to make it a really tight fit, but as i said the stuff they give you will do the job

 

[Pyro]

wantnit to be blue tho

 

[oldskool]

oi saw that erlier actuly but had to go out so couldnt PM ya how much wsa it again??

check the price in the classified, dont want to be breaking the rules on here, especially now im up to 200 posts

 

[robertbadlad]

did any one get a fault code from there split pipes?

 

[Pyro]

I didnt