Im thinking the same mate , possibly on the pre facelift they dont fit? Did your light fit?
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
Alex's - Candy White Mk4 Ibiza - SOLDD!!! :(
- Thread starter Alex 17
- Start date
Im thinking the same mate , possibly on the pre facelift they dont fit? Did your light fit?
Found this pic on another thread and woudnt mind going down this road, Love theys wheels. Anyone know what they are? Im guessing this car is on air ride.
Also going to get this cupra spoiler soon so im going to get it painted black , I've heard the light wont fit but then another member had it fit fine so im not sure anyone shed some light?
Yeah im sure this car was in Fast Car mag a while back. It looks very clean would be nice to try and pull this off. The wheels he got are BBS RS split rims and yeah im guessing it is on air ride.
Very nice car though!
![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
Yeah it was in Fastcar, got a feeling it's Dutch or Belgian if its the same one?
As for brakelight, yeah, mine was a direct swap, dead easy to change too. I did rough measurements, the lights about 315mm wide and around the 20mm high {approx}, if yours is around those figures I think it should go straight in. Bear in mind mine is a pre-facelift that's been facelifted with the bumpers etc.
Hope this helps
As for brakelight, yeah, mine was a direct swap, dead easy to change too. I did rough measurements, the lights about 315mm wide and around the 20mm high {approx}, if yours is around those figures I think it should go straight in. Bear in mind mine is a pre-facelift that's been facelifted with the bumpers etc.
Hope this helps
Ah right well looked into it and the wheels will cost me about 800 without tyres so thats a no go! , Ill keep theys until something pops up i really fancy.. Also going a trs tow strap laying around in black that i might fit.. , Although i would i liked white but they dont seem to be made ?
Last edited:
20mm Spacers now ordered , Things are comeing along nicely slowy makeing small improvements!
Went for theys
http://cgi.ebay.co.uk/20MM-Hubcentr...arts_Vehicles_CarParts_SM&hash=item5ad9cb1312
Hopefully should add a nice mean look and make it look even lower!
Went for theys
http://cgi.ebay.co.uk/20MM-Hubcentr...arts_Vehicles_CarParts_SM&hash=item5ad9cb1312
Hopefully should add a nice mean look and make it look even lower!
Last edited:
Should look good
It currently has 5mm spacers on , Scott removed the 20 mm for his new car , Not to worry though its my birthday next week so hopefully treating myself to a stage 2 part
Haha , Nor do i until i spent far too long looking into it .. I've got my eye on a front mount intercooler and going to awesome to look at getting a full miltek turbo back decat sorted , then need a stage 2 map and should hit 210 bhp and 300 torque limited due to wanting my clutch alive
Last edited:
You won't get 210 on standard turbo mate. Can reach that torque figure though. What happened to buying that lads turbo back?
And it never had 20mm spacers on since fitting them bbs wheels had some on order but they came after I sold the car to you and went straight on the cupra
Will look the tits with spacers on mind!
And it never had 20mm spacers on since fitting them bbs wheels had some on order but they came after I sold the car to you and went straight on the cupra
Will look the tits with spacers on mind!
this car looks great lovin the white
think you should remove number plate iv had mine of for ages lol when i did the lower lip on mine it made the front end look so much better.think yours looks better theo as you have fr grills and i only have black ones might invest in some.I really do think yellow fogs look great wanted to do it just never had chance really.
As Scott-o said you wont get 200+ on the PD130 turbo people say the max on a standard clutch is 300 lbft mine is runnin 310 lbft its only slipped a few times tbf il wait till it goes befor replacing it with a uprated one theo
think you should remove number plate iv had mine of for ages lol when i did the lower lip on mine it made the front end look so much better.think yours looks better theo as you have fr grills and i only have black ones might invest in some.I really do think yellow fogs look great wanted to do it just never had chance really.
As Scott-o said you wont get 200+ on the PD130 turbo people say the max on a standard clutch is 300 lbft mine is runnin 310 lbft its only slipped a few times tbf il wait till it goes befor replacing it with a uprated one theo
You won't get 210 on standard turbo mate. Can reach that torque figure though. What happened to buying that lads turbo back?
And it never had 20mm spacers on since fitting them bbs wheels had some on order but they came after I sold the car to you and went straight on the cupra
Will look the tits with spacers on mind!
Unfortunatly is turbo back was ''sort of sold'' He said if it falls through he will get back to me..
Bit gutted .. Ill be happy with 190-200 if possible Ah i see .. Well mine should appear about tuesday.. Then ill shot em on straight away !
Bit of an update .. Went and removed the numberplate and put it in the window like adam said.. Looks ace.. Also valeted the car with 4 layers of wax a full engine bay and interior clean.. the car looks mint! Heres some update pics
Similar threads
