show us your small screen washer bottle

[p34ch3y]

i just want to see what people are useing in replace of the 6ltr oem one realy and where have they put it,the more pics the betta

 

[R4cup]

Ahhh this would also intrest me as i have a golf mk4 bottle but not too sure how to get the 6L 1 out & where to put the 1.2L bottle

 

[s1l3nc3r]

As it goes ive just ordered one of these last night.
http://cgi.ebay.co.uk/1-2L-WINDSCRE...arts_Vehicles_CarParts_SM&hash=item3efaf14ad6

Im getting all the stuff together to re-route my intercooler pipework.
hopeing to mount it somwhere in the wing similar to how RobbieC done his.

IIRC some people have used the mk3-4 golf one.

 

[s1l3nc3r]

Ahhh this would also intrest me as i have a golf mk4 bottle but not too sure how to get the 6L 1 out & where to put the 1.2L bottle

+1 on the removal of the old one.

Check out robbie C thread as to where he mounted his think its around page 11.

 

[p34ch3y]

was thinking about either of these

1.5ltr or 2.2ltr

just scroll down in the link abit
http://www.durite.co.uk/pdf/5/05.4 ...reen washer pumps, bottles and components.pdf

 

[Dan1.6]

In mine it's not to remove at all a bit of jiggling and swearing and it were out

 

[dalegolf215]

Ahhh this would also intrest me as i have a golf mk4 bottle but not too sure how to get the 6L 1 out & where to put the 1.2L bottle

to remove the old one you have to unclip 3 pipes then undo 3 bolts jiggle it and swear a bit its not too bad had to take mine off the other day to clean it out bout 30 mins all together out and back in
not sure how easy it is to mount a different one thou

 

[kyle'87]

Lol plenty of room for my intercooler piping when its all fitted.

 

[s1l3nc3r]

to remove the old one you have to unclip 3 pipes then undo 3 bolts jiggle it and swear a bit its not too bad had to take mine off the other day to clean it out bout 30 mins all together out and back in
not sure how easy it is to mount a different one thou

Im guessing you gain access to the said botls from under the car. or can you do it from the bay.?

Mountings the new ones easy good old zip ties.

 

[dalegolf215]

Im guessing you gain access to the said botls from under the car. or can you do it from the bay.?

Mountings the new ones easy good old zip ties.

all done from the bay mate
1 bolt that holds a carrier for the 3 pipes near the bulkhead and 2 bolts near the headlight
pull the pump out and unclip it and i think u have to pop an air pipe off just to make it abit easier to get the bottle out

 

[chris_200120vt]

mine with golf mk4 washer bottel

 

[p34ch3y]

mine with golf mk4 washer bottel

could you please take a pic of that for me directly above it

i need to see jow much room i would have behind that

looks ideal for what i want mabie

 

[s1l3nc3r]

mine with golf mk4 washer bottel

Thats just how im going to be setting up my intercooler pipework.

After it goes down the frot of the car past the washer bottle what hoses and pipes etc did you need to join it upto the cooler.?

 

[chris_200120vt]

Thats just how im going to be setting up my intercooler pipework.

After it goes down the frot of the car past the washer bottle what hoses and pipes etc did you need to join it upto the cooler.?

just fo you i shall p34ch3y i shall take a better pic for over the week end and for s1l3nc3r the front bumper is coming off this weekend so can take some photos of how it has been routed after it has gone down past the washer bottle and what bends have been used all the metal pipe is the universal intercooler set that are on ebay

 

[p34ch3y]

just fo you i shall p34ch3y i shall take a better pic for over the week end and for s1l3nc3r the front bumper is coming off this weekend so can take some photos of how it has been routed after it has gone down past the washer bottle and what bends have been used all the metal pipe is the universal intercooler set that are on ebay

thanks very much mate

 

[s1l3nc3r]

just fo you i shall p34ch3y i shall take a better pic for over the week end and for s1l3nc3r the front bumper is coming off this weekend so can take some photos of how it has been routed after it has gone down past the washer bottle and what bends have been used all the metal pipe is the universal intercooler set that are on ebay

Ah your a star cheers for that.

 

[chris_200120vt]

thanks very much mate

here you go buddy if you need any other views let us know

 

[p34ch3y]

here you go buddy if you need any other views let us know

now this realy dos look like what i need ,
one more thing bud and perhapps one more pic

you see on kyle87 pic there are two holes ,now the top hole i need to mount a forge catch tank in here dose that bottle come over the top hole?

chris by the way what year a mk4 modle is it off mate?

 

[chris_200120vt]

not sure on what year it came from i bought it at vw festival last year all i know is it is from a mk4 golf. will have a look later about the holes i know i bolted it down using the hole at the front

 

[p34ch3y]

just had a look at some pics have looks like its from a 1.8t gti mk4 golf