g60 flywheel vr6 clutch

[cuprawill]

I was just wondering why people do this conversion, also do the go straight on or is there other work involved cheers

 

[pj1985]

People do it to get rid of the dual mass flywheel which is heavy and a known weak spot. It will also help with the revs as it spins up faster because its lighter. Only thing on the downside is a little bit of idle input chatter but it does no harm and goes away as soon as the cars on the move or clutch depressed. Its direct fit and you just need the flywheel, 12 bolts and the clutch. Part numbers are in the part number thread.

 

[cuprawill]

Ok thanks that's a great help, any idea wat sort of power there good for as I want to go stage 2 soon wat will I need to go stage two cheers

 

[pj1985]

G60 flywheel and vr6 clutch will be fine for stage 2 power.

 

[M87NER]

And Hybrid Power !

 

[DaleGT]

had my vr6 clutch and g60 flywheel in a month now and the car does feel a little better than before

 

[karls cupra]

what make of cluth are people using .. sach valeo or luk..

 

[redcupraboy]

LUK version I think, thats what I will be fitting to mine anyways from Euro car parts VW Golf 1997 VR6 clutch part no 641440660, hope this helps.

 

[cuprawill]

Do u have a forge fmic by any chance I saw a red one driving through Worcester the other day I'm from Hereford

LUK version I think, thats what I will be fitting to mine anyways from Euro car parts VW Golf 1997 VR6 clutch part no 641440660, hope this helps.

 

[redcupraboy]

I do have a Forge FMIC yes, it may well have been me. Do you go to college? And park in the Breeze car park?

 

[Ibizaκιας]

i did this convertion a mounth ago. i used the oem vr6 flywheel and the fx400 clutchmasters kit. extremely good when i do a quick drive.

 

[cuprawill]

I do have a Forge FMIC yes, it may well have been me. Do you go to college? And park in the Breeze car park?

yes mate certanly do im at college now go every wednesday is there many other cupras in worcester only 2 in hereford and one is off the road.

 

[pj1985]

i did this convertion a mounth ago. i used the oem vr6 flywheel and the fx400 clutchmasters kit. extremely good when i do a quick drive.

Not vr6 flywheel. That will not fit. Vr6 clutch and G60/ABF flywheel.

 

[Ibizaκιας]

Not vr6 flywheel. That will not fit. Vr6 clutch and G60/ABF flywheel.

nope.. the g60 flywheel is the same with the vr6.

 

[redcupraboy]

yes mate certanly do im at college now go every wednesday is there many other cupras in worcester only 2 in hereford and one is off the road.

I have seen your car parked in there a couple of times as I walk through the park with my dog to take him for a run down by the river. I dont really know of any other MK3 Ibiza Cupra`s around to be honest, there does seem to be a few LCR`s though. What mods are you running? Have you had the car long? Keep your eyes out in the meet section as there have been a few Worcester meets but I am yet to attend any

 

[pj1985]

nope.. the g60 flywheel is the same with the vr6.

The vr6 one has 10 bolts the G60/ABF one has 6 bolts. The bolt patterns are also different. How is that the same?

 

[Ibizaκιας]

The vr6 one has 10 bolts the G60/ABF one has 6 bolts. The bolt patterns are also different. How is that the same?

037105273C. check it and you will see..

 

[pj1985]

I dont need to check it. VR6 flywheels have 10 bolts and a different pattern. If it has 10 bolt holes it wont fit a 1.8t. If it doesnt have 10 bolt holes it isnt a VR6 flywheel. It is that simple.

People are going to read this thread and maybe buy a VR6 flywheel for this convertion because you have said it will fit. When it doesnt they will be out of pocket and still without a flywheel that will bolt up.

 

[Ibizaκιας]

then i dont know what i bought. r u saying that??????

 

[pj1985]

Yes. I actually just wacked that part number into google as im not near etka and it comes up as a G60/ABF flywheel just through google. None say VR6.