My dyno results (inc graphs)

[Damoegan]

Mine is set to 1.5bar

 

[Big_daddy]

Mine is set to 1.5bar

thats good if u got 237bhp, what map are you on?

 

[Damoegan]

P-Torque stage 2.

 

[Big_daddy]

P-Torque stage 2.

oh cool, having mines setup with will again as he done a god job on my leon.

 

[Damoegan]

Coolio.

Shouls see numbers just like mine then

I've still got a little more to come though as I'm getting a INA mani pluss a Newsouth power gasket

 

[ibizacupra]

thats surprising power on a DD for that boost.
was it run in shoot out mode? odd looking print out for a DD roller.. (new style or something?)

fueling is a bit weird at 5200rpm.. uber rich

 

[jase20vt]

First post says k03s, jase

A k03 would MAX out at circa 210-220bhp.

my bad, didnt notice that


im running 15 psi, but when it was on RR it had a slight issue, cant remember what it was as that was back in september

 

[Big_daddy]

Coolio.

Shouls see numbers just like mine then

I've still got a little more to come though as I'm getting a INA mani pluss a Newsouth power gasket

Yeh thats next on my list, not that hardto change over the mani.

thats surprising power on a DD for that boost.
was it run in shoot out mode? odd looking print out for a DD roller.. (new style or something?)

fueling is a bit weird at 5200rpm.. uber rich

Yeh the boosting is right, as i checked it many times on vag logs. strange map i got. lol
Yeh monster mototrsport/scooby clinic, we had alot of cars done from them, not sure what you mean shoot out mode?
I havea video some were my mate made for mines, 1st they warm the carup on d rollers, then do 3shots for. all on the same graph on screen.

Yeh the ubber rich is pre 02 sensor as i mentioned, keeps comaing up witha fault code perofrmance too low, thats will be changed soon.

my bad, didnt notice that


im running 15 psi, but when it was on RR it had a slight issue, cant remember what it was as that was back in september

whats that peaking past 15 psi?

 

[jase20vt]

yeh it peaks at 18 psi and stable at 15

 

[R4cup]

Looking good Big D, looks like we need to meet up in a few months when the road drys lol

 

[Big_daddy]

Looking good Big D, looks like we need to meet up in a few months when the road drys lol

i may stg2 by then

 

[ryan_s3]

It's the new windows software compared to the old dos stuff,run was done in shoot 4_f which tends to read higher than shoot_44. where is monster motorsport?

 

[ibizacupra]

It's the new windows software compared to the old dos stuff,run was done in shoot 4_f which tends to read higher than shoot_44. where is monster motorsport?

cheers ryan
i'll speak with DD about the new stuff.

 

[Big_daddy]

It's the new windows software compared to the old dos stuff,run was done in shoot 4_f which tends to read higher than shoot_44. where is monster motorsport?

so you sayin the reading are in-accurate?

Monstermotorsport are in leicster, loughbourgh, they also are traders on here too.

http://www.monstermotorsport.com/dynopage.htm

 

[R4cup]

i may stg2 by then

and....

 

[Big_daddy]

and....

lol, see how it goes.

 

[Cupra Ken]

I have exact same mods as you big daddy but on a ko3, mine made 180 bhp and 265lb ft that was on dd rollers and at 1.5 bar your bhp figures are impressive, as said earlier though you can really feel the tourqe though, mine was pullin 1.5 bar at 2500 rpm. gonna get a 4 bar chucked on mine in the next month or so and get it on revo stage 2 see if i can improve on bhp.