Jetex / Halfords Air filter?

[CJRamze]

Hi there.
I've had mine fitted but at the same time they wanted to use my car as a Tester car so I didnt fit it and its been enclosed in carbon fibre box. Contrary to popular belief there was quite alot of heat soak with mine however with the new set-up there's alot more power throughout the range and its out performing a BMC that was tried on the car.
Will post pics ASAP

Mine was held with a fabricated bracket I think

 

[gex18]

If you could post up some pictures that would be greatly appreciated

I had a look for a BMC CDA kit for the MK4 Cupra but couldn't seem to find one

Its a shame ITG don't make a maxogen kit for this car yet.....

 

[CJRamze]

http://picasaweb.google.com/lh/photo/U6LnQ-QmVrCnBvNyAS5ljA?feat=directlink
http://picasaweb.google.com/lh/photo/seHz0Kzd4oviuckfg5puuw?feat=directlink

Thats all I could get today.
The Pipe terminates just before that carbon fibre there seems to be a fabricated steel connector and then the filters attached to that. I'd imagine someone would knock that up for you for under £20

 

[Damoegan]

The BMC are proven to be restrictive @ over 200bhp

I fabricated a bracket and used the original airbox mounting point

Hi there.
I've had mine fitted but at the same time they wanted to use my car as a Tester car so I didnt fit it and its been enclosed in carbon fibre box. Contrary to popular belief there was quite alot of heat soak with mine however with the new set-up there's alot more power throughout the range and its out performing a BMC that was tried on the car.
Will post pics ASAP

Mine was held with a fabricated bracket I think

Do you have any logs to see how good the airflow is mate?

 

[CJRamze]

I don't at the moment however I saw it in action compared to the BMC.
Its very wooshy now I know that much.

 

[luke c]

i have just put a halfrauds special on its not bad at all nice little grunt and a hell of a difference on the split r

 

[gex18]

http://picasaweb.google.com/lh/photo/U6LnQ-QmVrCnBvNyAS5ljA?feat=directlink
http://picasaweb.google.com/lh/photo/seHz0Kzd4oviuckfg5puuw?feat=directlink

Thats all I could get today.
The Pipe terminates just before that carbon fibre there seems to be a fabricated steel connector and then the filters attached to that. I'd imagine someone would knock that up for you for under £20

Cheer for the photos, that looks to be a very tidy job

Its a shame I don't want to relocate the battery

The BMC are proven to be restrictive @ over 200bhp

I fabricated a bracket and used the original airbox mounting point



Do you have any logs to see how good the airflow is mate?

Sorry to be awkward, any photos of said bracket?

 

[Damoegan]

....Sorry to be awkward, any photos of said bracket?

Not realy mate, but I'll grab a few when I fit my new filter

 

[Gooner_Mike]

I have a Halfrauds universal open cone filter... seems OK so far!

 

[Damoegan]

I have a Halfrauds universal open cone filter... seems OK so far!

I've got a bigger and better one coming, Mike

The Halfords one has been fine for the last year though..

 

[Gooner_Mike]

I've got a bigger and better one coming, Mike

Green one right? Not a Jetex one then?

 

[Damoegan]

Green one right? Not a Jetex one then?

Yep, Green Cotton. Bigger and cheaper than the Jetex one, only £42.50

 

[Gooner_Mike]

Yep, Green Cotton. Bigger and cheaper than the Jetex one, only £42.50

Cool... But it will ruin the colour scheme!

 

[Damoegan]

Cool... But it will ruin the colour scheme!

Not over fussed about the colour scheme TBH mate.

Only red things in the engine bay are the filter and strut brace. Might paint the strut brace green

 

[Gooner_Mike]

Not over fussed about the colour scheme TBH mate. Only red things in the engine bay are the filter and strut brace. Might paint the strut brace green

Some people are though....

SNAP!!!

 

[Damoegan]

Function over form

 

[gex18]

Cheers for the photos / replies

I think for now though, i'm just going to order a green panel airfilter.

 

[Stis]

is it possible to get a filter from halfords?
its just a temp for the moment, i've bought a 007p and i want a good bov noise

which one do i need?

 

[turbo009]

Loads going for Jetex open cone mate,thinking of buying when from Badger Bill for mine

 

[Gooner_Mike]

is it possible to get a filter from halfords?
its just a temp for the moment, i've bought a 007p and i want a good bov noise

which one do i need?

Yes: http://www.halfords.com/webapp/wcs/..._productId_163573_langId_-1_categoryId_165660

Here it is in my engine bay. You will need to make a bracket though (to support the weight).