Come on Cordy drivers!

[F2 Stu]

Would love to get it back, would repsray it completely kiwi yellow or red.

http://www.ignitionlab.pwp.blueyonder.co.uk/Cordoba1.JPG
http://www.ignitionlab.pwp.blueyonder.co.uk/Cordoba2.JPG
http://www.ignitionlab.pwp.blueyonder.co.uk/Cordoba3.JPG
http://www.ignitionlab.pwp.blueyonder.co.uk/Cordoba4.JPG
http://www.ignitionlab.pwp.blueyonder.co.uk/Cordoba5.JPG


Anybody know what happened to it ?? Last I seen of it was when I traded it in in Scunthorpe SEAT years and years ago.

ex seat uk track car sprayed black? its been living at the nurburgring for the past couple of years I think.

 

[m0rk]

ex seat uk track car sprayed black? its been living at the nurburgring for the past couple of years I think.

Nah, there were a few of them... Tom's old one (the one you're talking about) didn't have those side skirts

That one crops up on ebay periodically....

There is one I think up to it's sills in mud in a Manchester dealer too

 

[tonijov]

It's just the standard bumper for a 1997 GLX here in Australia

 

[Icecavern]

http://www.seatcupra.net/forums/showpost.php?p=1019201&postcount=17

 

[mr noisy]

wounder if there any deeper EG closer to the floor

 

[Ovv]

ex seat uk track car sprayed black? its been living at the nurburgring for the past couple of years I think.

Yeah, ex seat uk car. Must have been blind when I think back about it, crazy colours.

 

[Ovv]

Nah, there were a few of them... Tom's old one (the one you're talking about) didn't have those side skirts

That one crops up on ebay periodically....

There is one I think up to it's sills in mud in a Manchester dealer too

Any idea which Dealer ??

 

[corda 1.6 8vsx]

im now also a proud owner of a cordy all iv done so far is put a janspeed exhaust system on her but i want to do so much more any ideas were i can get some headlights and taillights for her

 

[oldeboi]

Yeah!
12 months MOT in the bag!
All I have to do now is sort out the long list of niggles and i may start to feel like im getting there!

 

[Sheff's Cordy]

I wasn't lucky when I had my MOT it failed on a bearing, ball joint, n/s rear caliper had no servo and it needed a new lambda. Least I got me vmaxx coilovers fitted it just needs an alignment.

 

[oldeboi]

I wasn't lucky when I had my MOT it failed on a bearing, ball joint, n/s rear caliper had no servo and it needed a new lambda. Least I got me vmaxx coilovers fitted it just needs an alignment.

my had an advisory for a rear bearing but at under a fiver a side and 30 minutes tinkering, il be doing both this week anyway.
Mine hadnt been used for a while before i bought it and was also advised that one of the rear calipers was grabbing quicker than the other causing slight imbalance, all im going to do is strip them down and lube up the sliders as the pads and discs are pretty new, job done.
Ive seen lambda probes on ebay for under £20 so depending on what one you need, may be a cheap fix. Ball joints can be a ballache but just soak in WD40.

 

[Icecavern]

my had an advisory for a rear bearing but at under a fiver a side and 30 minutes tinkering, il be doing both this week anyway.
Mine hadnt been used for a while before i bought it and was also advised that one of the rear calipers was grabbing quicker than the other causing slight imbalance, all im going to do is strip them down and lube up the sliders as the pads and discs are pretty new, job done.
Ive seen lambda probes on ebay for under £20 so depending on what one you need, may be a cheap fix. Ball joints can be a ballache but just soak in WD40.

Do yourself a favour and grab a set of GolfMk4 or Leon Cupra rear callipers and put those on instead. You just need some Goodridge hoses but otherwise they're a straight swap and you wont have them seize again

Pete

 

[Ovv]

Guess what I just found on a certain auction site.... yep my old Cordy, looks like it needs some work, thinking about it though.

 

[andyj]

Think I spotted it on there at lunchtime to..... didn't pay too much attention to it, as I'm not too keen on the yellow/red colour scheme !

 

[Naz]

Guess what I just found on a certain auction site.... yep my old Cordy, looks like it needs some work, thinking about it though.

Think I spotted it on there at lunchtime to..... didn't pay too much attention to it, as I'm not too keen on the yellow/red colour scheme !

Ive seen that crop up a few times on ebay now, not keen on the colours myself, the back of the one ebay has a black panel, but on your pics ovv rear looks red??

 

[samnich]

Its on ebay at the mo going for spares/repair. Failed its MOT on £500 worth of labour according to the ad

 

[Ovv]

Im not keen on the colour scheme either, I dont know what the hell I was thinking when I 1st bought it, think I was won over by the performance to be honest.

Think the black panel must have been resprayed or replaced at some point Im guessing, plus someones stuck a whale tale on the rear... not pretty.

Have the list of failures and currently pricing the parts, even got me a ex VW technician who is willing to do the bits Im not keen on doing.

Very tempting, respray would be required as Im keen to restore it back to the original condition, so no large bumpers/sideskirts or whalestale. Track hack perhaps ??

 

[oldeboi]

Go for it mate, take off the stick on tatt and sell it to a chav.
Chances are it wouldve needed some paint anyway if its anything like mine.
Will rat-look be replaced by laquer peel look next show season?
Il clean up!

 

[Ovv]

right then,

Who has a spare front cordy bumper and some original sideskirts that they would like to exchange for a few beer tokens ?

Seriously though, am I just going down memory lane for memory lanes sake ? I dunno

 

[oldeboi]

lol to Baxter na she be running the 2.0-16v lump under ur bonnet and that my friend is the jetex exhaust system from the mk2 20vt cordoba

Any issues with making this fit?
Id like to replace mine soon and this may prove cheaper than having one made in s/steel.