Ibiza Cupra 1.8T induction

[Damoegan]

You dont have a battery cover though!! Therefore more room,

 

[brwmogazos]

My car is the facelift Damien, 2007 model.

The newer ones had no cover .

My spacer is arround 85mm to be more exact

 

[Damoegan]

I'll try to remember to mearure how much space I have tomorrow. Think I'll be lucky to have 50mm.

What g/s are you pulling?

 

[brwmogazos]

last time i logged @ Revo-Cargate Greece arround 180+g/s

without the spacer most of us read 170...

Need to log my car myself, i just didnt have the time lately...since temps are a lot lower now...the evo heatshield works very well no the car reducing the CFs...

 

[Damoegan]

I'm seeing about 176g/s at the mo.

Evo heatshield as in inlet manifold gasket?

 

[truss]

what size neck is your pipercross?

 

[brwmogazos]

70mm

 

[truss]

cool just wondering because of the joiner.

 

[evo2345]

im fitting this ITG filter to mine on saturday with 75mm spacer its going to be a very tight fit

 

[truss]

looks good!

 

[evo2345]

im fitting this ITG filter to mine on saturday with 75mm spacer its going to be a very tight fit

Fitted this today, was a tight fit but it went on ok, Induction noise is very loud now sounds like a hoover in the glove box not sure if i can be doing with the noise tho it may do my head in after a while.

 

[brwmogazos]

It is like that with all cone fillters...

forge 006- 007

forge tip

N249 bypass

Cone filter

removal of the bonnet rubber seal...

Is the recipe for HOURS and Hours of enjoyment....

 

[Guffers]

It is like that with all cone fillters...

forge 006- 007

forge tip

N249 bypass

Cone filter

removal of the bonnet rubber seal...

Is the recipe for HOURS and Hours of enjoyment....

+ remove sound deadening from under bonnet = mega smiles for months!

 

[Deamox1fy]

Thanks for all the feedback mates.. I went and got a nice filter, problem is that the filter size is 80mm and the MAF area is 70mm. I got a sillicon hose with 90degree bend, what can I use so the 76mm will go over the MAF and tighten nicely? It's right for the filter opening, just need a reducer I guess.

 

[R1ch85]

http://www.merlinmotorsport.co.uk/SAMCO-HOSE-&-KITS-Samco-Straight-Reducer/c16_99/index.html