-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
I don't think it's the dogbone, as it gives very little vibration when idle. Only under pull away load as the engine takes the strain. Yer your right 720-760 you have a better memory than me Chris
THe car run fines otherwise, pulls just as hard as ever, but it just gets this occasional flutter when idle. It's not that bad it's stalling, but you do think that's not quite normal.
Doubtful SEAT would do much about it, if it was the exhaust valves. To be brutally honest if it came to cracking open the engine, I'd ask Awesome to fix it and stick a set of stronger rods and pistons in it while it was in bits. Rather than take it to a dealer to either argue over a claim or pay them through the nose to do the work.
We'll see what develops anyway, all good fun.
Mine turned up today too.
Just for info Mark, only 30 of the catchcans turned up. All have been sent, but one of the 4 boxes seems to have gone temporarily AWOL.
Cheers Hurdy, I did catch the posts on the forum earlier, I was hoping it may of come but it hadn't.
I ordered 2 , 1 for me and 1 for blade , we have both had ours now , it all depended how quick you paid , the first 30 people who paid first were sent out first.
Although reading the thread looks like some people who paid first are still missing theirs
Warren the can is tiny mate , you will have loads of room to fit it.
Although after speaking to Andy at ITG he says the Leon has much more room behind the lights than on S3 , so our options might be better for mounting, and i have a picture of the production ITG filter if anyone wants to see it?.
Although reading the thread looks like some people who paid first are still missing theirs
Warren the can is tiny mate , you will have loads of room to fit it.
Although after speaking to Andy at ITG he says the Leon has much more room behind the lights than on S3 , so our options might be better for mounting, and i have a picture of the production ITG filter if anyone wants to see it?.
Option 1: In front of carbon canister
Option 2: Where OEM intake used to be (Very unlikely mounting point due to fan location)
Neither ideal due to pipework, but I have a buyer if I get frustrated trying!
Still not had mine,
ditto.
Turns out mine is with a guy called Robin. They sent him 2 by mistake. He's forwarding it to me at the weekend, so hopefully see if I can fit it mid to late next week. Glad I checked with him as to my personal details as most of them were misspelt or wrong! At the price we paid I have no room for any complaint.
It seems a couple of people have received two of the 30 sent out. Im a bit gutted as i was one of the first to send payment and still haven't received mine. Was hoping to fit it this weekend too.... Oh well!
It seems a couple of people have received two of the 30 sent out. Im a bit gutted as i was one of the first to send payment and still haven't received mine. Was hoping to fit it this weekend too.... Oh well!
Thought only Red Robin had 2 delivered?
i ordered 2 and recieved 2 but the the other was for Blade.
Just had a PM from the guy who's got mine saying he is posting it to me today.
Would be great if it arrived tomorrow, but then with the postal strikes....
Would be great if it arrived tomorrow, but then with the postal strikes....
New NGK BKR7EIX plugs gone in the Cupra today, and it was much smoother driving home from Awesome, tick over seemed happier too. Will aim to do some logs soon.
Might be tempted by the ITG kit, once it's released in its final production form.
Still no PCV kit, but that can go on too once it arrives.
Might be tempted by the ITG kit, once it's released in its final production form.
Still no PCV kit, but that can go on too once it arrives.
Off Topic But with reference to the ITG Intake got sent this today
The final price for the KO4 kit will be £320.00 + vat (£300.00 + vat for the
KO3 cars without the DV return). Looks like its almost ready
The final price for the KO4 kit will be £320.00 + vat (£300.00 + vat for the
KO3 cars without the DV return). Looks like its almost ready
Off Topic But with reference to the ITG Intake got sent this today
The final price for the KO4 kit will be £320.00 + vat (£300.00 + vat for the
KO3 cars without the DV return). Looks like its almost ready
thats the pic i have , i did ask but no one wanted to see it so didnt post it.
mines coming with polished pipe work extra £20
Final production is coming , Andy is just waiting on pipework , the above pic is the final production version.
deposits will be taken from next week.
Mines just arrived, but its a lot bigger than I expected.
I'm not holding out any hope it will fit, but I have a buyer lined up if it doesn't.
I'm not holding out any hope it will fit, but I have a buyer lined up if it doesn't.
Still not got mine either! Are they coming by royal mail? Anyone got a clue as to when they'll turn up?
Similar threads
