Miltek or Supersprint?

[Miikael]

What is your opinion? Which exhaust system is better for a 20vt Miltek or Supersprint? Supersprint is more expensive, but is it any better? Are there any other alternatives available? I guess non resonated should be also producing a tiny little bit more hp.

I remember reading an article in which they tested different exhaust pipes for 1,8T VW. The differences in hp increase were significant. Some of the new systems actually made a power loss while others got gains of 13 hp...

 

[cupra.al]

blue flame is another option good quality exhausts.

 

[techathy]

Supersprint usually do decent R&D. Their Panda 100HP system not only produces more power everywhere above 1800rpm but pushes peek torque 400 or so rpm down the rev range & peek power a few 100rpm further up. How it compared to the Miltek system is anyone's guess & bet no one has run them back to back with the standard exhaust.

 

[Damoegan]

Miltek is proven to give gains.

I've had mine on the rollers befor and after fitting my miltek. It made 12bhp and 13lb/ft..

 

[techathy]

Miltek is proven to give gains.

I've had mine on the rollers befor and after fitting my miltek. It made 12bhp and 13lb/ft..

Very true but the only way you get proven gains is by someone trying it. I think you'll find the exhausts end up giving very similar gains as my experience with SuperSprint has always been positive is aural & performance terms. I've been thinking I'll get a SuperSprint exhaust, but right now I'm undecided on what car to get as & I keep on eyeing up a late Mk1 Leon FR 150, they look so nice.

 

[Damoegan]

Very true but the only way you get proven gains is by someone trying it..

Very true mate.

 

[Pabs]

I mixed and matched on my Leon - I had a Miltek sports-cat, and supersprint catback

 

[Miikael]

Miltek

Miltek is proven to give gains.

I've had mine on the rollers befor and after fitting my miltek. It made 12bhp and 13lb/ft..

Hmm.. Starting to think about Miltek... With a 4bar fpr and Revo stage2 it should add some more power that I'm hungry for...

 

[teepee4bh]

i've just put a remus exhaust on my 1er. Turbo lag has almost dis-appeared. Picks up so much faster and is more eager than before.

I'd stick to somebody who has developed specifically - not generic box and bling tail pipe only.

I ended up with a fit concern - Remus's technical guy got in touch and told me what to do.

Try them also. Good price in comparision to Miltek and supersprint. The thing that swayed me was cutting the rear bumper.
Didn't fancy that at all and wanted a single oval that didn't look like a drain pipe