After AmD Remap

[stu-fr]

Just had AmD remap yesterday on my fr. First RR reading before remap was done gave a figure of 152.2bhp, car is tottaly standard apart from green cotton panel filter and PD160 air intake. does this sound right? I am now wondering if the after remap readings are right. Cheers

Oh and btw, how do i add a signature on here? cant find it any where.

 

[Damoegan]

What was the reading after the map was put on?

Is it a derv or petrol mate?

 

[stu-fr]

sorry for the delay in getting back. the 1st run after the map was 184.1bhp and the 2nd run was 181.6bhp

 

[Ric 2001]

Sound right of a generic remap. Pushes the FR to the cupra's performance range.

Where about are you from? (Reading some of your posts, it sounds like you live quite close to where I do.)

Saw a Red FR on Tueday evening near sarsons vinegar works.

 

[stu-fr]

yeh it was me, im from near rochdale but i work at Vauxhall on Greengate. I noticed urs too, made a nice sound as u went past.
So you think the readings are about right then?

 

[DScape]

Oh and btw, how do i add a signature on here? cant find it any where.

If you are a new user, you are temporarily restricted from posting in our For Sale section, adding a signature and making use of the private messaging system. This is to prevent new users abusing the forum, and/or rogue traders scammers from taking advantage of the forum members. Please ensure you take some time to read all of the FAQ/Rules part of the forum.

Restricted use for Newbies: ALL new users are restricted until they have exceeded more than 15 forum posts and 15 days of registration to the forum. Please note that this does not include any General Topic sections.

As above

---\/ Nay worries!

 

[stu-fr]

Thanks pal

 

[antnee]

What were the torque figures?

 

[stu-fr]

240lb/ft before and between 288/295lb/ft after (2 runs after remap)

 

[Ric 2001]

yeh it was me, im from near rochdale but i work at Vauxhall on Greengate. I noticed urs too, made a nice sound as u went past.
So you think the readings are about right then?

I'm from Shaw

I noticed urs too, made a nice sound as u went past.

That would be the milltek, sounds better when it hit 3k. Yours looked very clean, mine needs a good wash.

So you think the readings are about right then?

Yeah the figure look good, don't want to go over 300lb/ft as the clutch will get toasted. You could try for 200bhp (custom remap) but you'd need some more mods doing I think. Not 100% on the derv side of modding though.

 

[antnee]

240lb/ft before and between 288/295lb/ft after (2 runs after remap)

They are about right so nothing to worry about.

BHP figure is esitmated by the rolling road so its easy to change the figure a lot, torque can't be changed though.