Strut bolts

[danielc16]

ok done the search and gave up, rite im rebuilding the front setup of the steering and surspension on the ibiza and got new bolts, wish bones, track rod ends etc... only thing is i need the strut bolts thats hold the coilover to the hub (the 2 bolts that you can adjust the camber) so i need some body to tell where and what part number it is.

i have looked on ebay and only found this:

http://cgi.ebay.co.uk/BOLT-pair-FRO...trkparms=65:12|66:2|39:1|72:2136|293:1|294:50

thats what i need but for a seat ibiza cupra R

thanks!!

 

[chris_200120vt]

this should be the part number your wanting from seat parts dept

N 10174002

 

[danielc16]

leganed chris spent a few hours laste night trying to find them lol hopefuly i can get the rest of the stuff so their is no noises and movement in the steering, as some thing dont feel right and i rather have it all perfect for the mot

 

[Damoegan]

There only about 50p each off SERE Motors on here.

 

[danielc16]

There only about 50p each off SERE Motors on here.

linky???

 

[Fl@pper]

N 10174002

+nuts

N 90323704

hey are self locking and useless after a few goes

 

[Damoegan]

linky???

Linky

 

[danielc16]

thank you will get both nuts and bolts!

 

[Damoegan]

You dont need nuts as they are captive in the strut top them self. Just 6 bolts.

 

[lemonslap]

You dont need nuts as they are captive in the strut top them self. Just 6 bolts.

8 bolts. I would replace the strut nuts as they are meant for one use, if reused the nylon part will no longer do its job.

 

[danielc16]

only 4 bolts, its the two bolts that hold the coilover to the hub

 

[Damoegan]

8 bolts. I would replace the strut nuts as they are meant for one use, if reused the nylon part will no longer do its job.

On the mk4's the nuts are captive on the top mounts so you cant just change the nuts. You have to change the wholt top mount.

 

[lemonslap]

On the mk4's the nuts are captive on the top mounts so you cant just change the nuts. You have to change the wholt top mount.

i'm sure like most newer vag products but this is for a mk3 version and these have 8 (4 per side) that screw into the top mount from above, then there is a single nylon lock nut that holds the strut to the top mount.

 

[lemonslap]

only 4 bolts, its the two bolts that hold the coilover to the hub

Sorry mate read it wrong thought u said top mounts

 

[danielc16]

just to clear a few thinga up i need the part no for these bolts 2 per a side

 

[Damoegan]

Sorry mate read it wrong thought u said top mounts

Me too