What performace can you expect from a remaped ibiza

[simonthekane]

Been a long time since i have been on here but im looking at getting another ibiza

What kinda BHP will the mk4 ibiza chip too with a stage 2 revo, and would you need the other modifications they list such as the exhaust ??

Also what kinda 0-60 could you expect from it and a standard rempa ??

Im torn between the ibiza and a leon r as that will chip 260bhp easy , the ibiza has the cheaper running costs tho lol

 

[mymorph]

not sure about stage 2, or petrols. but id go for the leon given the choice - maybe not so exciting to drive but a better balanced chassis to start with.

 

[evo2345]

my stage 2 revo ran 238bhp + 270ft/lb @P-torque back in january

 

[simonthekane]

my stage 2 revo ran 238bhp + 270ft/lb @P-torque back in january

What other modifications did you have on the car at the time ??
That must be pretty quick in the ibiza... i had a mk3 with 205bhp and that felt pretty nippy...

 

[edewer]

managed 220bhp + 272ft/lb at regal autosport today.

thats with a 007p, filter and love and care due to being run on optimax.

the torque turns it into an animal when driven hard, but the way its been mapped its much nicer to drive normally too as it isnt always running full boost.

 

[simonthekane]

Was that with a stage 2 revo also ??

 

[kriso]

240 BHP / 274 lb/ft on P-Torque Stage 2. Mods are in my sig

 

[ljpacey]

kriso have u had any problams at all runing 240hp what boost you runing?

 

[kriso]

No problems at all, boost peaks about 22psi I think..I'm never looking at the gauge!

 

[edewer]

simon thats just on a stage 1!

 

[evo2345]

What other modifications did you have on the car at the time ??
That must be pretty quick in the ibiza... i had a mk3 with 205bhp and that felt pretty nippy...

Mods are Full miltek system, Green panel filter in smoothed airbox, FMIC, forge DV. Rveo stage 2 remap, Forge TIP

 

[evo2345]

simon thats just on a stage 1!

Torque seems a bit high for a stage 1, is that revo stage 1?

 

[edewer]

nope it was done by Regal Autosport in Southampton. Not REVO software no, its their own one. same company who did the 400BHP-odd RSR golf

to be honest though you dont really notice it unless you're actually really pushing the car. why SEAT couldnt have set it up properly in the first place i dont know!

evo - is yours a cupra or an FR? and is the bigger front mount worth the money?

 

[evo2345]

nope it was done by Regal Autosport in Southampton. Not REVO software no, its their own one. same company who did the 400BHP-odd RSR golf

to be honest though you dont really notice it unless you're actually really pushing the car. why SEAT couldnt have set it up properly in the first place i dont know!

evo - is yours a cupra or an FR? and is the bigger front mount worth the money?

mines a FR with the forge FMIC

 

[james.l]

the cupra ibiza will go to about 240BHP at a push for stage 2. The Leon Cupra will go to 275BHP+ for a stage 1.

But both are completely differant cars.

 

[kriso]

Yea it's the K04 in the Leon that lets it go higher than the Ibiza. The K03 is on the limit at 240BHP. You need to get a JBS04 or other bigger turbo to get any more power

 

[ljpacey]

No problems at all, boost peaks about 22psi I think..I'm never looking at the gauge!

nice one thanks matey

 

[Damoegan]

Typical stage 2 on a k03s is ~235-240bhp and ~270lb/ft

I made 229bhp and 252lb/ft peaking at ~21-22psi on P-Torque stage 2 but I still have the standard exhaust.

 

[james.l]

damo, i thought you have to have the full turbo back exhaust for a stage 2 map, otherwise it's over restrictive?

 

[Damoegan]

damo, i thought you have to have the full turbo back exhaust for a stage 2 map, otherwise it's over restrictive?

You do realy. But mine has been mapped around the standard exhaust. Thats why I'm 10-15bhp down on 'proper' stage 2 numbers.