Pre Filter socks...

[kyle'87]

Do they exist?

I know they do but can't find them anywhere! The only place I found is in the US of A

I am after one because I am about to get this induction kit...

I will be cutting it so it is not so far down the wing but still worried about water getting in.

Other option is to fit the CAI > seal the area from obvious places where water can get in> run a cold air feed from behind the grill to the Jetex cone I will be getting aswell.

any ideas guys?

 

[M87NER]

ebay.....

 

[kyle'87]

ebay.....

I've looked and I've looked and I've looked

search for so many diffeent keywords but can't find sod all

 

[Ricardo_Smooth]

i've got one. the water isn't a proiblem if you cut it down and dont drive through massive puddles at stupid speeds!

 

[kyle'87]

i've got one. the water isn't a proiblem if you cut it down and dont drive through massive puddles at stupid speeds!

I was hoping someone could clarify this as I think im over panicking , cheers mate

 

[-pseudonymous-]

Aslong as the filter isn't fully submerged in water it shouldn't be a problem although as above your best off cutting the pipe down so the filter isn't sat too far down in the bumper.

Try searching for 'Pre Charger' on ebay mate. Im sure some will come up!

 

[kyle'87]

Aslong as the filter isn't fully submerged in water it shouldn't be a problem although as above your best off cutting the pipe down so the filter isn't sat too far down in the bumper.

Try searching for 'Pre Charger' on ebay mate. Im sure some will come up!

Cheers ollie

 

[Ricardo_Smooth]

mine sits at the side of the battery so to speak (its the only real place it fits properly anyway) so you wont get it wrong pal

 

[Robbie C]

I don't really understand why people put them down in the wing. They'll get so clogged with crap so quickly they won't flow very well at all unless you're willing to clean it every x number of days. I'd just make sure it's over by the wing and uprate the standard air intake with some 100mm ducting - job done

 

[M87NER]

I don't really understand why people put them down in the wing. They'll get so clogged with crap so quickly they won't flow very well at all unless you're willing to clean it every x number of days. I'd just make sure it's over by the wing and uprate the standard air intake with some 100mm ducting - job done

Agree with you there mate, i used have mine in the wing untill it started causing issues-actually made my boost cut out when under load....

check post #30 to see the state of mine from in the wing

http://www.seatcupra.net/forums/showthread.php?t=209368&page=2

 

[artemis_1991]

Yeah probably best having it short and running a CAI to it, then you'll get best of both worlds.

 

[kyle'87]

Cheers for the input guys, managed to answer each of my questions one after the other without me even asking

 

[-pseudonymous-]

Cheers for the input guys, managed to answer each of my questions one after the other without me even asking

SIMPLES......