does mk2 ibiza suspension fit a mk3 ibiza cupra

[joe-cupra]

ayup lad's and the odd woman, dose mk2 ibiza suspension fit a mk3 ibiza cupra if i get new top mounts?
had a search and cant find oat with a defo answer cheers

 

[Myki da Pyki]

Quite simply NO

 

[Daymo]

you need mk 3 ibiza suspension, theres plenty of different manufacturers out there that do them for our cars so why would you need a mk 2 setup

 

[turboboy]

they will fit but you need 1x plank of wood 1x washing up liquid bottle and 2x wood nails!

hope this helps

 

[Daymo]

they will fit but you need 1x plank of wood 1x washing up liquid bottle and 2x wood nails!

hope this helps

thats amazing!!!!

 

[Reuvers]

is it better for me to keep the fact that I have Polo (same as Mk2) coilovers fitted to my Mk3, to myself? lol

the difference is that Mk3 front suspension have wider springs. they also have a large disc which serves as the top bearing.

The polo/Mk2 fronts have a skinier spring with a small round bearing on it, much like the Leon does.

I got my hands on some polo ones which I thought would fit. I obviously ran into the spring problem, so I made them fit.

but as said, best off to get proper ones.

Note: rears fit fine. no difference there

 

[turboboy]

is it better for me to keep the fact that I have Polo (same as Mk2) coilovers fitted to my Mk3, to myself? lol

the difference is that Mk3 front suspension have wider springs. they also have a large disc which serves as the top bearing.

The polo/Mk2 fronts have a skinier spring with a small round bearing on it, much like the Leon does.

I got my hands on some polo ones which I thought would fit. I obviously ran into the spring problem, so I made them fit.

but as said, best off to get proper ones.

Note: rears fit fine. no difference there

i didnt say they wouldnt fit!!! did you use the parts i listed?

if you cut a section out of the springs then use a dollop of pva jobs a goodun!

this is alot of hasssle tho my advice is get some mk3 ones!

 

[cuprachrissy]

they will fit but you need 1x plank of wood 1x washing up liquid bottle and 2x wood nails!

hope this helps

hahahaha tickled me!

 

[NowGottaIbizaMk5]

Also need some sticky back plastic to make it look nice ;-)

 

[Daymo]

also need some sticky back plastic to make it look nice ;-)

fail!!

 

[Reuvers]

i didnt say they wouldnt fit!!! did you use the parts i listed?

if you cut a section out of the springs then use a dollop of pva jobs a goodun!

this is alot of hasssle tho my advice is get some mk3 ones!

i wasn't as much referring to your answer. I thought you were taking the piss.

but as you said, get proper mk3 ones if you have the option

 

[h17och]

answer is yes with no problems.

if you change top monts they are a direct fit

 

[Reuvers]

yes but hooch, I bought the topmounts and bearings for the mk2, but the topmounts didn't fit the mk3?

so I'm now on mk2 coilovers with mk3 topmounts and mk2 bearings lol

 

[h17och]

m2 shocks are the same. top mounts different. same as wot i said before

 

[turboboy]

i wasn't as much referring to your answer. I thought you were taking the piss.

but as you said, get proper mk3 ones if you have the option

i was only tickling your nuts mate!

 

[Reuvers]

i was only tickling your nuts mate!

and I liked it



hooch i agree with you they are a fit, as I have them...