Probee's GT2871R LCR

[Wilko]

part number 06A 906 461M

Outlet end
http://www.seatcupra.net/forums/album.php?albumid=330&pictureid=902

Inlet end
http://www.seatcupra.net/forums/album.php?albumid=330&pictureid=901

 

[probee]

thanks for that John. that confirms it for me... i hope we agree.

looking at it from this end.... this end is 77mm ID and then steps down twice, the second one i cant measure but it ends up at 72.2mm through the bore of the housing.

 

[Wilko]

whats the part number on yours

 

[probee]

that'll be on the part i dont have John but the part i ordered the other day was a 06A 906 461 M... taken from ETOS

EDIT: thats the number i gave SEAT,if he changed it, he didnt tell me.

have you put a vernier on the one in the photo?



just realised that was a 75mm OD MAF you measured so yours cant be 77mm this end... im confused!

 

[Wilko]

don't have a vernier at home. I'll measure it at work next time i'm in. Could be a few days though

 

[probee]

no problem i appreciate you taking the time to help.....

i just pulled the screens out of mine... dims of the 3 steps are as follows (on mine)... approx - 77mm, 75.5mm then down to 72.2mm

 

[Wilko]

Just checked and its definately 69.8mm id where the sensor sits.

 

[probee]

Thanks for measuring it John.. thats very strange. do any of the dims i posted match up?

theres only two numbers listed for the MAF housing and one of them is for the exchange unit.... i could send you my part if you want to compare them.

 

[Wilko]

the 75.5is the size of the first step. the outside diameter is about 77

 

[probee]

the OD on mine is 80mm

 

[DPJ]

Just checked and its definately 69.8mm id where the sensor sits.

Thank *u** for that, I was waiting for the stage we discover it's me who's got the wrong size.

 

[probee]

hehe... i was just thinking that maybe your car is flowing even more air than you think..

ill give nick a tinkle to see if i can throw a vernier on his

 

[probee]

im still very confused!!

 

[probee]

i found this whilst looking for some info earlier.... quite a bit of it will apply to the LCR.

http://www.wikitt.org/wikiTT/images/f/fc/TTweakers-Guide.pdf

 

[mrwookie]

i found this whilst looking for some info earlier.... quite a bit of it will apply to the LCR.

http://www.wikitt.org/wikiTT/images/f/fc/TTweakers-Guide.pdf

I have this printed off and in my laptop bag so when at work if it gets boring always something to good to read....

 

[probee]

I have this printed off and in my laptop bag so when at work if it gets boring always something to good to read....

I knew 90% of it but was still glued to it for a couple of hours. It might be worth posting it elsewhere if it helps people.

 

[Skorchio]

text sent but just for a record in the thread my OD where the sensor sits is 72mm.

 

[probee]

Do you mean ID mate?

 

[Skorchio]

My measuring device arms where to short so i was getting smaller reading.. i extended with cardboard.. and got the same results as you arron.

 

[probee]

i need to see one to get my head around it... ill take the end i have to Totalvag tomorrow.