My Power Graph from P-torque RR Day!

[Neel-Cupra]

Had the car on the rollers at the P-torque rolling road day last saturday and was amazed at the results:

267.4 BHP

241 lb ft Torque

Heres the graph:

Car is completely stock so very happy with the results! comments welcome

 

[Al]

Very good

The cold temperatures seem to be helping a little it seems

 

[singh123]

good results there mate

 

[Poverty]

near identicle to robs car isnt it?

 

[webhype]

is this realistic? how on earth can it put out 267bhp when its supposed to be 237 lolol. its a good thing, might get my cupra RR'd

 

[Neel-Cupra]

is this realistic? how on earth can it put out 267bhp when its supposed to be 237 lolol. its a good thing, might get my cupra RR'd

Well what alot of people have told me is the car runs the same set up as the new S3, except the intercooler is slightly smaller .. SEAT seem to also have declared the power as 237bhp to keep the insurance group down, plus you can't really have the cupra running figures declared near the S3 .. VAG must be thinking

 

[webhype]

lol. So...if your car happened to be in a slight fast driving situation with an S3....youd be in for the win right? Im pretty sure my cupra isnt doing 260+, i got whooped by a type r the other week..i nearly drove down to revo right then to remap lol.

 

[Neel-Cupra]

lol. So...if your car happened to be in a slight fast driving situation with an S3....youd be in for the win right? Im pretty sure my cupra isnt doing 260+, i got whooped by a type r the other week..i nearly drove down to revo right then to remap lol.

There are several other members on here that have managed 260-267bhp from there mk2 leon cupra's so it ain't no fluke

 

[chrisboyle999]

every stock cupra rr'd seems to have made more than 260bhp, if not its usually the rr that is to blame.

 

[chrisboyle999]

Im pretty sure my cupra isnt doing 260+, i got whooped by a type r the other week..i nearly drove down to revo right then to remap lol.

what is it they say about a bad tradesman.....?

 

[Cupra Ross]

That torque curve is a joy to behold!

 

[Neel-Cupra]

That torque curve is a joy to behold!

I know looks awesome! but the standard fuel pump on the cupra prevents it going any higher but still, its spread over the rev range very well

 

[Poverty]

lol. So...if your car happened to be in a slight fast driving situation with an S3....youd be in for the win right? Im pretty sure my cupra isnt doing 260+, i got whooped by a type r the other week..i nearly drove down to revo right then to remap lol.

Oh lord what did you do wrong. His must not have been standard.

 

[Poverty]

Robs car

267.1 BHP
and 258 lbs/ft torque

 

[GazM]

How do you get such an accurate reading?

I don't think I could get mine to the nearest 2 from the graph.

 

[Tam]

How do you get such an accurate reading?

I don't think I could get mine to the nearest 2 from the graph.

becuase that wont be the full scanned page he's posted, just the graph section. Else where on that bit of paper will be all the other info including temps, RPM etc.

 

[Neel-Cupra]

becuase that wont be the full scanned page he's posted, just the graph section. Else where on that bit of paper will be all the other info including temps, RPM etc.

On the day Will at P-Torque had a printer error so didn't get a proper printout at the end of the day so only got the graph to hand!

 

[RickyD1975]

Excellent result and fantastic torque curve!

Hopefully I will get mine down to a RR sometime in the future. All this Parenthood thing is taking up all my time now, especially that the other half is back to work and also works Saturdays.

 

[robdf2]

Robs car

267.1 BHP
and 258 lbs/ft torque

Cheers poverty

yup nearly the same figures , im chuffed to bits now

 

[robdf2]

Had the car on the rollers at the P-torque rolling road day last saturday and was amazed at the results:

267.4 BHP

241 lb ft Torque

Heres the graph:

Car is completely stock so very happy with the results! comments welcome

do you know the make of the rolling road you went on m8?
was it the same make as the one 1 went on at torque of the devil?