Fixed rear washer and another mod!
Finally got round to fixing my rear washer jet today!
The break was in the engine bay, so I removed the airbox and found it lurking right in the depths under the ECU.
Bit of a git to fix, the join doesn't seem to be the best anyway so I'm not surprised it popped off! Rerouted the pipe a bit so it was easier to get to and taped it up so it shouldn't happen there again! All put back to normal now!
Along a different line, when the airbox was out, I removed the trumpet thingey in the top bit of the box
and drilled some holes on the cold side of the bottom half of the airbox
Just about to take it for a test drive to see if there is any difference...