What Boost

[Millsy87]

Hey im just curious what boost people are running and how the boost is delivered, as in between what rev range etc.
Im running pretty much standard with only revo stg1 and forge dv, and am curious to see what other people are seeing??

 

[DaNnY_LaD]

21psi max hold at 18-19psi? you should really get a boost gauge mate..

 

[Millsy87]

I have im trying to compare, to make sure mine is ok. it seems to be the same as yours, spikes to about 20 holds for a while. does yours hold boost all the way through to the redline, or drop off before?

 

[DaNnY_LaD]

Is yours a k03? if it then the ko3 doesnt hold boost for longer than 3000krpm...tails off at 5.5krpm...
K03s is a different story holds boost for longer up the Rpm range

Mine hasnt been Mapped yet just doin my FMIC and other bits be4 hand..

 

[Millsy87]

Yer Only KO3 thought this was the case, i did see somewhere people holding up to 26psi, or is this only with a Ko3 etc?

 

[DaNnY_LaD]

26psi on stage 1 or stage 2?

your hasnt got a FMIC So guessing heatsoak would kill the pressure and cause it to drop...

 

[KP]

Mine peaks at 20psi ish

This vid was taken on the motorway when i floored it in 5th, 20psi gauge.

http://s233.photobucket.com/player.swf?refURL=/&file=http://vid233.photobucket.com/albums/ee119/Plummers87/BoostGauge.flv

 

[Beaker™]

Mine peaks at 1.6BAR (23psi), holds at around 1BAR (14.5psi) but tails off quite quick. (ko3 on REVO1 by the way)

 

[djscorch]

Yer Only KO3 thought this was the case, i did see somewhere people holding up to 26psi, or is this only with a Ko3 etc?

26 psi on ko3 = ko3 go boom!

 

[thewiizard]

I've got 8 pounds of factory standard blower... So come on then.. Who wants some?

 

[KP]

26 psi on ko3 = ko3 go boom!

YARP!!!!


(vid of boost gauge added to my previous post )

 

[big eck]

Mine boosts to about 22psi and tails off to about 14psi on Phase 1 Custom Code with a K03