South Wales Cupras Chat

[Daz_gibbo]

Got a pic with good viewing of your injector rail phil?
Wouldnt mind a spare rocker cover to polish up now aswell tbh. Keep an eye out for me!

 

[davidol]

cable tie the injector wiring on the underside of the fuel rail, cleans it up nicely. CT100 tom, top quality mate! why you wanting a standard downpipe phil?

 

[jivejester]

cable tie the injector wiring on the underside of the fuel rail, cleans it up nicely. CT100 tom, top quality mate! why you wanting a standard downpipe phil?

voicemail?

 

[PhilW]

**** aye daz....

I want a standard downpipe to sell mine to get a 3" decat from blueflame.

 

[davidol]

gonna go have a look now matt

 

[rogers]

right en lads need a helping hand racking my brains wot to get for xmas for the car

sorted a new TIP

wot else is worth having for a couple hundred quid

 

[rogers]

so where is everyone then?

 

[PhilW]

Alright all, thought i'd get the thread back on as that dudes thread about overboosting is catching us up! lol.

Where the **** is everyone now? Not seen Tom on here in ages.

My clutch started slipping last night after loggin, cranking the wastegate and adding timing. lol.

 

[Daz_gibbo]

I've moved out over xmas so quite busy. Have you ran at powerstation yet Phil?

 

[PhilW]

Nah i didnt make it xmas time daz, shame really as i'd like to run it there as it supposed to be a good setup.

I might do soon when i finish what i'm doing with it.

 

[Daz_gibbo]

Yeah, would of been good to hear of a figure from elsewhere.

 

[mr_D]

hi guys. little issues with my clutch pedal. it seems to be sticking to the ground a bit. not really affecting the drive now as i know its doing it so every now and the i pull it back up but any ideas. cant find the info on here. did have a little look. !

 

[PhilW]

I get this problem. I'm sure its to do with the master cylinder or the clutch needs bleeding. I'll bleed mine and let you know how i get on.

 

[davidol]

its the clutch master cylinder rod not clipped into the little white clip on the clutch pedal propperly, look underneath the dash and check the little white clip in the box section on the side of the pedal arm isnt broken and if it isnt grab the rod and force it into the pedal, you should hear it click into place!

happy new years boyos by the way! havent been on here much, had a busy christmas and im off sking / snowboarding in bulgaria on the 5th for a week but i'll be back online after that

 

[PhilW]

Dave, can you get any wiring now?

I need some 4 awg wire, battery terminals and a decent fuse.

You lucky **** goin skiing, i'll be off next month, no idea where yet tho just gonna see what deals are about.

 

[rhysox]

phil, you free anytime this week? i really need to get my car logged mate! let me know, thanks a lot

 

[mr_D]

phil what would i need to do to take my car to a revo stage 2 remap? if you dont mind answering!

 

[PhilW]

phil what would i need to do to take my car to a revo stage 2 remap? if you dont mind answering!

#

Turbo back exhaust, like most of us on here got the milltek downpipe with high flow cat but you can go de-cat on stage 2 if you want. I'm tempted to change mine to a 3" decat from Blueflame.

You also need a 4 bar fuel pressure reg.

Things like intake pipe and FMIC help a lot as well.

phil, you free anytime this week? i really need to get my car logged mate! let me know, thanks a lot

I can probably do it tonight mate, but it would have to be monday night otherwise.

 

[davidol]

nothing in my opinion, revo stage 2 is just a smoother map, try it and see, worse case senario then a race cat and FMIC will sort you out. Havent got that many contacts in audio at the moment phil as they are all leaving the scene, try www.caraudiodirect.com for a cheap arse 4awg kit!

 

[rhysox]

ok mate, what sorta time would you be free? if you're too busy- just say and we can meet next week.
rhys