Sachs clutch and flywheel?

[smark32]

Just a quick question. i have been looking all over the net to find where i can buy a Sachs clutch and flywheel and how much will it cost? Its for my ibiza tdi pd 130 running 175bhp and 280lbs ASZ. Thanks

Mark.

 

[Ad Lav]

I too need this, was told by JKM its around £800 inc the clutch and flywheel and fitting.

 

[T. Spark]

Might aswell get a slip diff whilst at it guys

Oh wait, thats just me doing that in 2 weeks

 

[Gazb]

Would it not be alot cheaper to just get an uprated fiction disc fitted?
Don't have to change the flywheel then so you won't end up with a noisey flywheel.

 

[Jonny]

Just found this site on another thread.... don't know if it's of any use to you?

http://www.vwspares.co.uk/product_info.php?products_id=1364

 

[devonmikeyboy]

Just a quick question. i have been looking all over the net to find where i can buy a Sachs clutch and flywheel and how much will it cost? Its for my ibiza tdi pd 130 running 175bhp and 280lbs ASZ. Thanks

Mark.

I too need this, was told by JKM its around £800 inc the clutch and flywheel and fitting.

You only need to change your flywheel if the old one is knackered.

 

[Ad Lav]

That's what I heard - here's hoping its not!

 

[Mr Cellotape]

Try Allards

 

[Ibiza 130 tdi]

Don't let them change the flywheel ffs!! Mine is FINALLY being sorted tomorrow after 3 months of "it'll be done tomorrow."

Hopefully no more rattle tomorrow!

 

[Ibiza 130 tdi]

And Bunnin on here is the guy you want to talk to. He's a Sachs dudey. Can't remember what they call them.... retailer?

 

[Ad Lav]

Ooh... interesting!

 

[smark32]

well here is the full story, i had a new clutch and flywheel fitted. the clutch was rated at 330lbs and the flywheel was standard. the car did 500 miles and now it judders like hell when setting off and judders when booting it around 2000rpm! the garage have no better clutch or flywheel to handle the power so i need a decent kit. not the shitty cheap stuff i bought. all my own fault, being a cheap skate

 

[Ibiza 130 tdi]

I bought the Helix kit which iirc handles more torque than the Sachs kit. And they changed my flywheel from a DMF to a SMF when doing the clutch. it rattles soooooooooooooooooo badly! When a lights, you just keep your foot on the clutch to avoid embarrassment. It rattles horrifically cos it's lighter weight than the standard one....

 

[smark32]

ye i would like to stick with a dmf just need a better one that can handle the torque.

 

[Ibiza 130 tdi]

I'm going back to the standard DMF tomorrow. they've just "made a clutch that will work with the DMF". which is all a loads of tits but I don't care! just want peace back!

 

[smark32]

ye dont blame, well i'm waiting for the garage tomorrow to tell me if its the clutch or dmf that cant handle the torque! i bet its the dmf! think they put in a aftermarket oem one.

 

[Ibiza 130 tdi]

its the clutch. dont think the flywheel has anything to do with it really. the only reason they change it i think is because the SMF is lighter than the standard DMF. it's meant to make it rev easier. if that makes sense? i think thats right

 

[Altech]

Im looking to change my clutch when i get mine remaped to get the most out of the map. How much am i looking at for a sachs clutch by itself?, as i can fit it with a mate.
That link that Jonny posted is really cheap at £124! is this an uprated clutch or a standard one?

 

[smark32]

ye they defo put in a dmf not a smf. just hope they can sort it without putting in a paddle clucth! the lad said that was the next option for the clutch's the produce.

 

[smark32]

think thats just a standard one mate!