Altea Raised Boot Floor

[bry]

I want to fit this as well...... from the other thread I have these part numbers:

5PO 858 855 D 1UA - false floor
5P5 858 833A - Rail (LH or RH)
5P5 858 834A - Rail (LH or RH)

Is this all you need and are the fitting holes already there?

After this I would also like a full size steel spare (R16) - anybody have a place to get these? Correct PCD, etc without paying a premium at dealers

 

[dpat]

Measurements:

Forgetting the spare wheel you have a depth of 6" at the end closest to back (15.5 cm)

With wheel full sized (think mine is), 2" down from the cover (5 cm)

thanks for that - hmmm don't know - pram with wheels off is still about 7'' - grrrrrrrrrrrrrr

I liked the car too. don't know what to do!?!?!?!

 

[jtmac]

Bry,

You might want the divider as well

5P0 861 091 1UA (i think)

Like Magnus said it probably helps it carry more weight.

 

[bry]

Cheers, I'll get around to phoning a dealer some time.......

 

[bry]

Just fitted - pretty easy when you remove the three bits of carpet either side

 

[jtmac]

Just fitted - pretty easy when you remove the three bits of carpet either side

Quick work that just six month to do

Actually, that beats the 12months I took to get around to swapping the grab handle for the sunglasses holder (5P0 857 465 B)

 

[MrBone]

Just fitted - pretty easy when you remove the three bits of carpet either side

By contrast, the first thing I did when I got my Altea was remove the boot floor adn divider completely to give more space - maybe we should operate an exhange program

 

[bobbycfc]

Bry, how much was all the bits you needed? Do the same bits fit the XL?

 

[Craig Senior]

Bry, how much was all the bits you needed? Do the same bits fit the XL?

I doubt that it will fit the XL as the boot is longer.

From what I can gather from the brochure the MY08 XL comes with the 2 tier boot floor. I hope so anyway

 

[bry]

I wanted a full size spare, hence the false floor!

All the bits came to 104 quid: two rails, cross brace, 4 screws and floor plus foam insert for spare wheel - bit expensive but wanted it anyway.

Don't have a breakdown on prices other than the screws cost 2 quid.