Gave In.. N249 Bypass Done...My View

[Funkyfin2000]

Did mine tonite!

Fapping brill!!!

What i need to know now is how do i get rid of the black box as theres one valve still got electrical connector plugged in and not sure i can just pull it all out?

Or can i seperate the black box off and remove just that all on its own?

 

[ian_cupra]

you can remove the electrical plug from the black box,

but i'd make a braket for it, otherwise you end up with what i had if you just bolt it to head, it falling onto manifold and melting!!!

 

[Funkyfin2000]

does that not create an error in vag.com??

 

[ian_cupra]

leave it electrically connected, but make sure its sercurly held down thats all, as when you remove the large black box you take the places there secured too

 

[stevegti6]

this is the best mod ever ive done and what a improvement

 

[truCido]

really? I didnt notice that big a difference lol

 

[PhilW]

It would make a massive difference if your original vac hoses are shot.

 

[seli_babe]

really? I didnt notice that big a difference lol

I think it depends on what you've already done to it.

On my red one which was std apart from a Bailey's I didn't notice anything, apart from a cleaner dump.. But on Mike's which was at stg 2 (i think) when we did it, I noticed a load of difference.

 

[stevegti6]

I changed every vaccum hose on the car the were all split and perished not surprising after 106000 miles though

wicked wastegate chatter now

 

[seli_babe]

I changed every vaccum hose on the car the were all split and perished not surprising after 106000 miles though

wicked wastegate chatter now

Were you actually getting any boost before

 

[David_smith_909]

wicked wastegate chatter now

and your turbo will probably last a few 1000 miles
check all your plumming of your n249 bypass, check your dv
chatter is not "wicked" - its very very bad !

 

[Myki da Pyki]

Done mine and its actually made the dv alot quieter and theres a huge delay with the discharge now. I used the same method as this:

Ive got a forge spliter dv on there so was expecting it to get better but its now worse.

Any ideas lads?????????

 

[Funkyfin2000]

ive undone mine it was rubbish!

 

[Myki da Pyki]

undoing mine in the morning cos ive got no power at all now

 

[PhilW]

undoing mine in the morning cos ive got no power at all now

I'll put money on something being wrong.

 

[Bogwoppit]

I'll put money on something being wrong.

Agreed.

 

[ian_cupra]

i'd say so too, cant understand how people can get it wrong,

thing is only takes one person to do it wrong and put up pics, then everyone copies it!!

 

[PhilW]

Of all the photos in this thread you pick the hardest one to understand. I'm still tryin to work that photo out.


This one is probably the best i reckon...

http://img408.imageshack.us/img408/1249/n2491xr7.jpg

 

[ian_cupra]

i'd say the same too

 

[Funkyfin2000]

well i did it to, the thing was running ok bar loads of limp modes!