milltek don't make the downpipe/cat anymore apparently

[cupra collins]

alrite mate for the miltek dp and cat go here very helpful and a good price
http://www.icjperformance.co.uk/products-view.asp?brandid=1&modelid=48

 

[AwesomeSarah]

Oooh does that mean we can start a bidding war on the last one we have in stock
Nah
Sarah

 

[HarveyGTI]

But how much does it cost for these 'Tweeks'?

funn you you should mention that

when my mate had his ibiza, it had the k03 with a jabba map on it, then he went k03s, FMIC, exhaust etc

went back to jabba to get it "tweaked" and they wanted to charge him the full £500 again lol! but then it was the K03s variant which at the time, Jabba were not too keen in doing...if indeed they still are?

 

[JIMYU]

But how much does it cost for these 'Tweeks'?

funn you you should mention that

when my mate had his ibiza, it had the k03 with a jabba map on it, then he went k03s, FMIC, exhaust etc

went back to jabba to get it "tweaked" and they wanted to charge him the full £500 again lol! but then it was the K03s variant which at the time, Jabba were not too keen in doing...if indeed they still are?

it costs £50 to adjust the map to new mods ie fmic, k03s &4bar fpr and nothing when i thought my map was spiking a bit

 

[HarveyGTI]

it costs £50 to adjust the map to new mods ie fmic, k03s &4bar fpr and nothing when i thought my map was spiking a bit

thats good then, Jabba must have changed their costs or policy

or sayin that my mate might have just pissed them off lol!!!

 

[JIMYU]

just to be clear...i'm not talking about jabba prices, i haven't got a clue about those

impossible performance do mine (thought I'd mentioned it but got my threads mixed up lol)

 

[HarveyGTI]

just to be clear...i'm not talking a jabba prices, i haven't got a clue about those

impossible performance do mine (thought I'd mentioned it but got my threads mixed up lol)

lol fair enough Jim

 

[stevegti6]

im running my ibiza as in my sig bellow with the standard jabba map for a ko3 i dont know if its custom map or generic every mod ive done ive got badger 5 to log it and every time its been spot on with the readings

the car is booked in with jabba for a custom map on july the 9th i dont think there is anymore to come out of it but we will see

im asking jabba to run the car up on the rollers and seeing what it makes before going ahead with the custom map im not spending £500 for 5 bhp if you see what i mean

 

[acidstrato]

the problem with that is whether you trust that they wont rig their rollers to under read with your current set up and over read with their custom remap

its very simple and takes next to no time at all for them to feck about with

 

[__B3NNY__]

the problem with that is whether you trust that they wont rig their rollers to under read with your current set up and over read with their custom remap

its very simple and takes next to no time at all for them to feck about with

Thats interesting to know..... Think id take it to a independent RR before going to jabba then see what it makes after.

 

[jsparks]

But how much does it cost for these 'Tweeks'?

it never cost me anything actually to go and get my timing adjusted quickley or have the boost trimmed back.

Have you got any threads from revo k03s ibiza's making more that 225bhp mate? ive never seen one on here, k03 ibiza getting near that, but no k03s over that figure (shows its the same map).

No prob not worth you spending 475inc vat on another map, but your point was dont go k03s to people. Go k03s if your going custom mapping, as its then worth the gains.

I have done a side by side comparison to k03s revo stage 2 ibiza's with similar mods, and pulled away with ease, like they werent even trying.

 

[jsparks]

Thats interesting to know..... Think id take it to a independent RR before going to jabba then see what it makes after.

People have

The old jabba rollers in the old building used to be unreliable, the new ones seem to be pretty much spot on, ive had within 5bhp on other rollers, and over readings in the past. Torque has always been consistent and very high, almost 295/lbft

 

[Forbez]

These so called Custom maps, all sound abit like, Revo with a sps!

Live mapping is the way forward, or Dyno plotting.