Just had it on rollers what you think?

[ChrisCurzon]

Hey guys just though would get your opinions on this had car on rollers at awesome today these are figures I got on all 3 runs

Run 1 188 bhp 216 Torque
Run 2 183 bhp 214 Torque
Run 3 185 bhp 217 Torque

Temp was at 15◦c

Mods I have at min are turbo back exhaust, Revo stage 1, forge 007, air filter and n249 bypass was running on normal unleaded petrol at time.

Do you think this is about right or should I be expecting abit more out of the car here’s the graph I got anyway let me know what you think.

Comments welcome please

 

[m0rk]

why does the power graph not show below 3000rpm

 

[ChrisCurzon]

i dunno i only noticed that after that bhp graph only starts at like 3100 rpm

 

[ChrisCurzon]

Just looked on there web site at graphs on there look like all start at just after 3000

 

[blackie]

Dont revo claim 206 bhp????

 

[ChrisCurzon]

on there site is does yea but that on boost 9 timing 4, i have no idea what mine is setup to as map was done before i got car.

 

[__B3NNY__]

I think maybe your car may need adjusting for better results, I Reached 196bhp with the same mods as yours bare a turbo back, that was on standard settings tho which i think is around 5 and 5?

Im hoping for around 210bhp at the end of mrach now ive had my TIP and cooler fitted,


Remember the magic words tho, DYNO LOTTERY!


David.

 

[Olly20VT]

I dont think there are to bad, there are a few thing that may have helped like runing Vpower, a new MAF (because you never know how good it is).
Also all rollers are differant.
I would be happy with that.
Don't forget revo will state the max bhp they have ever had not the adverage.

 

[ChrisCurzon]

yea still happy with results as still feels quick, may have got slightly more with vpower, may get a new maf at some point as migth be dodgy mine.

really wanted to see what its running at now before i start to do out more to it going for revo stage 2 soon so hope they might set it up abit more for me when i upgrade.

i was never expecting to get over 200 anyway from what iv done upto now.

 

[Beaker™]

Don't forget revo will state the max bhp they have ever had not the adverage.

I doubt REVO could claim 200bhp unless they could achieve it on a regular basis. I'd find out what settings your on and go from there, i'd not be too happy with those figures if i knew they were correct, but as said, all dynos are different anyway

 

[gazjones]

arnt they whp figure though and not fly figure? as there rollers only calculat wheel power?

 

[Beaker™]

arnt they whp figure though and not fly figure? as there rollers only calculat wheel power?

Good point, something to look at.

 

[ForgeMotorsport]

Looks good and Awesome have a good product....as long as you are happy and the car feels quicker , more torque etc , then thats great .

Much to much emphasis on dyno graphs and "-my cars got more BHP than yours " .....going on in the industry for my liking ........good honest smooth power , with good customer service , no need to wave the dyno plots around ...... you dont need to carry a 12 " rule in your pocket to prove youve got a 10 "**** do you

 

[ChrisCurzon]

yea as you say long as your happy with what youve got doesent matter.

all the power is shown as clutch power so will be fly power.

 

[jonesya3]

How much did it cost to get it rolling roaded at awesome boris ?

 

[acidstrato]

arnt they whp figure though and not fly figure? as there rollers only calculat wheel power?

it does say clutch power

what settings u running revo?

might require cranking up but tbh id say they were fine. prob broke 190 on supreme fuel
would say intercoolers holding you back though

 

[gavthelad]

if that is flywheel power that seem fairly low to me........mine was 188.6 at the wheels without an uprated downpipe. It might be worth asking what settings they used on the revo out of interest.

 

[ChrisCurzon]

Cost £55 + VAT, yea know i should of had better fuel in but just went as had nothing else to do and forgot had a full tank of normal fuel in lol.

havent a clue what settings running on revo not tuched map side since i got there car and havent got a sp3 yet.

the intercooler is the next job before i get 4bar fpr on there and stage 2 map, will turn the settings up once i done that.

 

[David_smith_909]

Looks good and Awesome have a good product....as long as you are happy and the car feels quicker , more torque etc , then thats great .

Much to much emphasis on dyno graphs and "-my cars got more BHP than yours " .....going on in the industry for my liking ........good honest smooth power , with good customer service , no need to wave the dyno plots around ...... you dont need to carry a 12 " rule in your pocket to prove youve got a 10 "**** do you

hit the nail on the head their

 

[Freerider]

If you your doing it for figures make sure you pump yours tyres up if your desperate to squeeze an extra few bhp out of the car.