Rolling Road Result

[Snoopie]

This was the best run of the day which I had. Problems with holding boost and the car is running quite lean. This was the only run I had where the boost held.. Now I can see where things need to be adjusted, this is the start to my future of modifying the beast

 

[allh2k]

Wow i have no idea what any of that means but i wish i had a cupra...

 

[ibizacupra]

is this another LCR which is reported to run lean there?

 

[Snoopie]

Yes... I've got a graph of it running lean if you wish?

 

[Snoopie]

For the note anyhow... Running Lean - 196.8 bhp at the wheels..

 

[bentaw]

snoopie out of curiosity what engine code do you have is it AMK

 

[Snoopie]

Yes AMK...

 

[Pabs]

most of the LCR's that were running lean @ JKM rolling road day have now been sorted


what map are you running? Says IP map?

 

[Snoopie]

Yes, Impossible Performance... How did the car's that were running lean get sorted out? Just had there re-maps rechecked?

 

[Pabs]

well one is bentaw (above) and one is richybigman.

You'll need to talk to them to find out exactly, but i THINK Richy had a dead MAF, and bentaw had a dodgy ECU....

I could be wrong there though

 

[RobM]

is this another LCR which is reported to run lean there?

Out of interest, what was that comment supposed to mean?

 

[Snoopie]

well one is bentaw (above) and one is richybigman.

You'll need to talk to them to find out exactly, but i THINK Richy had a dead MAF, and bentaw had a dodgy ECU....

I could be wrong there though

Cheers. Just out of curiosity. How could I find out my MAF is dead? Or dying...?

 

[Pabs]

What did JKM tell you could be at fault? They know a LOT more about this kinda thing than I do.
I'll be worth you doing some logging with vag-com though, check airflow, cf's.. that kinda thing.

What do IP quote as an after figure for their remaps? And what do you need for their "stage 2 maps" with respect to hardware?

 

[Snoopie]

JKM, Wanted to run a full diagnostic check on the car at a later date to find out what things might be going wrong with it. They couldn't give me an answer as to what the fault maybe, although they give me a rough idea along the lines.
Stage 2 Maps from IP quote about 250+ with the modifications I have. Stage 3 would be an exhaust and Front Mount and something along the lines of a BMC airfilter.

 

[ArosaRacer]

ive an IP map and its quite a savage now with mods ? ring mike and ask him

 

[Pabs]

so what gains does a stage2 have over a stage 1?
Bit confused to see the difference TBH - you don't have any real mods listed that a stage2 map could take advantage of.

Anyway, thats besides the point - the full diag check they speak of would of course involve some VAG-COM logging, so thats what you need to do to spot the problem(s).

 

[bigjode]

If what you have is stg2, what is stage 1?

Just ask because your mods are stage 1 with any other remap put there.

Are those figures at the flywheel, or at the wheels?

 

[Snoopie]

Those figures are at the flywheel.
I'm quite happy with the way the car is running, the remap is really smooth, the power delivery is fantastic. I just need to sort out some problems with the valve and dump valve spring, and see where it leads me.

 

[bentaw]

no one knows what is wrong with mine and richybigmans car both still are not running right although they have improved they suspect rich's is a dodgy ecu and for some reason mine struggles to breath top end but hopefully blueflame will sort that put

 

[The MoffMeister]

I had impossible performance re-map STG1, with basically an induction kit and thats it, mine was done on comp then taken out on road where bits of fuel air etc were fiddled with, now i've had it a while im not overly impressed as my mates LC spools up so much quicker and we had same mods?? suppose thats the difference between RR re-maps and all comp stationary ones!
Wheni asked about STG 2 he said i'd need 3" DP and thats about it so i presume STG3 is FMIC, full stainless exhaust, increased TIP ETC!!

Hope your happy with it though!

p.s Bentaw there is a company thats started up called pipeworks the bloke who does used to design the blueframe and fabricate them, and at mo there no VAT registered so maybe give them a call, can get number if you need it they quoted me £775 for a full 3" system with 3" DP and 100 cell cat back race sounds good to me!