Xenon fitment

[Harry's cupra]

Hi guys got a xenon kit for my Ibiza and been having a look at fitting it, one thing though any ideas where to fit the Ballast?

 

[davidol]

just did mine today, remove the bumper and headlights and mount the ballast bracket on the chassis legs, loads of room and hidden when the bumper and headlights are reinstalled

 

[Harry's cupra]

was that easy enough to do? Never had either off

 

[davidol]

yeah, quick guide, undo 4 screws holding each inner arch edge to bumper, open bonnet and undo 4 screws above the grille, remove number plate, pull off bumper moulding (grey strip), remove 2 screws behind there, pull out towing eye cover and opposite cover, remove two screws (one small one towing eye side and large one opposite side), give the bumper a pull and it should slide off towards you after unplugging foglights, headlights are held on by two screws on top and two underneath

 

[cu51pra]

just stick the ballest on the back of the plastic bulb cover easy thats what ive done

 

[Harry's cupra]

Does seem like there is enough room between the Battery and the cover on the passanger side!
You got any pics?

 

[cu51pra]

il take some tomorrow for you ok mate p.s theres loads of room each side

 

[jonesya3]

fitted mine tonight same place as davidol loads of space and easy to do

 

[davidol]

im getting skilled at this, ive done 5 in the last couple of days, did a leon cupra R and a citroen C4 the other day, not fun!!!

might be worth me pointing out i can supply these kits now, stunning quality with headshrunk and braided wire, waterproof plugs, brackets for the ballasts, the lot bascially £100 + £5P+P, normally supply H7 fitment with 6000k temperature but all others can be supplied too, PM me for info

 

[Harry's cupra]

Shame ur up in Cardiff and not closer David otherwise I would ask you to fit mine as well!!

 

[jonesya3]

Shame ur up in Cardiff and not closer David otherwise I would ask you to fit mine as well!!

Its easy mate i found the hardest part was removing the grey strip on the bumper which was tight but the rest is straight forward

 

[Harry's cupra]

yeah trip removing that with one hand