After some research I decided to get a DIY parking sensor kit (£18 from ebay). Obviously its the most basic version, but should hopefully be good enough for me
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190322960277&ssPageName=STRK:MEWNX:IT
I have searched the forum and it seems quite a few people have attempted / fitted something similar.
There seems to be three main stages to fitting..
1. Wire 'control box' to reverse light and also earth in boot.
2. Drill bumper and fit sensors, wire these to control box.
3. Find somewhere to attach buzzer and wire it to control box.
Does anyone have a photo guide or photos of fitting parking sensors, didn't find any in search..
My main query's are..
A. Where is the easiest place to cut into the reverse wire and to earth the connection on Ibiza's?
B. I'm guessing the bumper needs removed to fit the sensors.. Where is the best place to feed the sensor wires to the control box before refitting the bumper?
thanks in advance
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190322960277&ssPageName=STRK:MEWNX:IT
I have searched the forum and it seems quite a few people have attempted / fitted something similar.
There seems to be three main stages to fitting..
1. Wire 'control box' to reverse light and also earth in boot.
2. Drill bumper and fit sensors, wire these to control box.
3. Find somewhere to attach buzzer and wire it to control box.
Does anyone have a photo guide or photos of fitting parking sensors, didn't find any in search..
My main query's are..
A. Where is the easiest place to cut into the reverse wire and to earth the connection on Ibiza's?
B. I'm guessing the bumper needs removed to fit the sensors.. Where is the best place to feed the sensor wires to the control box before refitting the bumper?
thanks in advance
Last edited: