crt turbos ko3s hybrid info

[james walker]

guys, anyone provide me with good info on whats needed to go ko3s hybrid?

looking into the crt turbos hybrid as a cheaper alternative to bt route...

whats the gains, and gear needed for this... idiots guide appreciated.

looked at a thread in this, but after some clear info on all kit and costs involved please

appreciated in advance

 

[Damoegan]

http://www.seatcupra.net/forums/showthread.php?t=216627

 

[james walker]

ah, dint see that thread tbh.

so, manny not essential, what will it decreas if not fitted?

also i have milltek dp and cat already will this one suffice, dont need 3"?

parts can be sourced cheaper than that aswell so sound a great kit for the price

 

[Damoegan]

Yea, parts can be had for cheaper if you go second hand or search around.

If you dont go for a high flow mani you will prob only get ~250bhp. But you can get a cast mani cheap enough. Both THS and INA do them for under £200 iirc.

Your DP should be ok to use mate.

 

[james walker]

so with manny for 200 quid your looking at another 30bhp?

worth it then...

£280 to fit is a very good price aswell.

do you reckon will at p-torque would stage 3 map it.... his is 400 quid iirc.

liking the idea of this, may source parts over time then.

 

[Damoegan]

Yea, I'm sure Will would do you a custom map for it.

Deffo worth getting the mani.

Try someware like Backdraft for injectors and for sale section and/or ebay for LCR/TT TIP.

You WILL need a FMIC too mate.

Dont forget new gaskets too.

 

[james walker]

worth going custom fmic?

seems a bit of a faff, or stick to forge etc...

bit of a price difference between the 2

 

[Damoegan]

If you have the cash. Have a look at Rob Don's thread, Huge ebay intercooler and pipework for £2-300.

 

[james walker]

is that not lcr though, is lc not different, twin single side exit pipework....

 

[Damoegan]

Rob has a LC but he does have a SEM mani so intake in on LCR side. But Dave (DPJ) has a LC and has a large single pass cooler.

 

[james walker]

so how and what parts will be needed, again idiots guide needed, im okay with most car bits, but turbos and upgrades on this is a new thing for me....

links would be ace to the type of fmic and parts i would need... cheers pal

 

[Damoegan]

http://www.seatcupra.net/forums/showthread.php?t=142886

Thats the only one I can find at the min mate but thats not the on I was thinking of, sure it was on a red mk1 loen. He has done a guid how to fit it too.

 

[james walker]

thinks ill maybe stick to the forge one.... save over time, get bit by bit then itll not sting me as much...