Not looked into this no, the four exhaust system from a Golf R would looker better I think.
Either way that's a nice car you have there, good colour. Mine is silver... Boring!
Is your engine stock? Might be worth looking at a stage one, I just did mine and it flies now!
Thank you mate
Looking at a stage 1 remap in the future and the DSG also.
Have looked at an open cone air filter. Some say no point as the stock one is fine but I just wanted the noise.
Did a bit to the Leon last weekend. Clay barred, polished, waxed, debadged and silver Seat badge swapped to black View attachment 41355
Thank you mate
Looking at a stage 1 remap in the future and the DSG also.
Have looked at an open cone air filter. Some say no point as the stock one is fine but I just wanted the noise.
Did a bit to the Leon last weekend. Clay barred, polished, waxed, debadged and silver Seat badge swapped to black View attachment 41355
What rear badge did you use? I have only found front badges available on the likes of eBay, Amazon etc.
Will have a read of that.Nice work, looking good! Mine needs a good clean, and I was wondering about swapping my LEON letters for black ones. Some crude photo-shopping later and I'm still not sure. The black SEAT badge might be the way to go having seen yours. Hmm?
I've just had a stage one from REVO and would definately reccomend it. Link to my write up of that below. Can't really comment on the cone filter, I've left my intake & filter stock for now, they do the job. Probably till I next have some spare cash anyway... Not sure the DSG tune is entirely necessary, reasons for that explained in my stage one thread.
View attachment 41356 View attachment 41357
Revo Stage One 2.0 FR TSI
Hello everybody! Thought I would share my experience of having my car remapped. I drive a 2019 Leon ST 2.0 TSI. From the factory this develops 190 hp & 236 lbs/ft. The car has never felt slow during my short ownership (purchased Jan 2024), in fact it has proved to be quite brisk. I just wanted...www.seatcupra.net
Here's my FR ST with quad exits. I didn't explore using a cupra exhaust as I know the pipe diameters are different on my 1.5 TSI. Just got a custom exhaust place to do a backbox delete and install a right hand hanger.
Will be swapping the tips to ovals like a gold R and the rieger diffuser for the maxton to accommodate the extra width.
View attachment 41488
Yes the fins are nice on the rieger. Just the holes for the tips are designed for the cupra single ovals whereas there's a maxton one designed for the cupra R tips which are dual ovals.Do like that.
Currently waiting on delivery of the Reiger diffuser. I went with Reiger because the fins looked slightly more aggressive compared to Maxton.
Since found out the cut outs aren't as large as the Maxton ones though. Have a custom exhaust company at Walsall waiting for me to confirm once i've received the diffuser. They've said they will remove the back boxes to see if it's loud enough, if not then remove the res (highly doubt I will do the res due to using it lightly for work).
Someone did mention on there FR ST the holes were already there for the secondary exhaust hanger? (Same chassis as a Cupra).
Yes the fins are nice on the rieger. Just the holes for the tips are designed for the cupra single ovals whereas there's a maxton one designed for the cupra R tips which are dual ovals.
I'm not actually sure mine has a res as it has a GPF but I only touched the backbox and it now makes a little more aggressive sound which is great for a Dad as a daily aha!
I'm not sure about what was already there bar the fact the garage welded on their own hanger so there might be something already there to weld it to but there definitely wasn't a hanger. Was no problem for them and it's solid as a rock.
What sideskirts are those?Here's my FR ST with quad exits. I didn't explore using a cupra exhaust as I know the pipe diameters are different on my 1.5 TSI. Just got a custom exhaust place to do a backbox delete and install a right hand hanger.
Will be swapping the tips to ovals like a gold R and the rieger diffuser for the maxton to accommodate the extra width.
View attachment 41488
They're the official Seat side skirts.What sideskirts are those?
I don't suppose you have a link please?They're the official Seat side skirts.
I bought them 2nd hand but here's Seat Direct Part's link to the exact same version.I don't suppose you have a link please?
Exactly. 5 door is the same for skirts whether it's hatch or ST – there are different versions for 3 door.Side skirts are exactly the same for both the hatch and ST right?
I see no difference with the floor only rear window and rear bumper etc.