What BHP?

[Beaker™]

Should be having the car RR'd soon, what BHP/torque should i be hoping for with the following mods:

(The car was RR'd at 158bhp @ 6125rpm before mods)

2001 Ibiza Cupra
APR Remap
BMC Carbon CAI
Neuspeed TIP
Power Intake Gasket
Bailey DV30


PS. Tried www.goAPR.co.uk for some info but site is under construction







.

 

[m0rk]

200bhp/220lbft

unless you take it to a crap dyno operator & it heatsoaks, in which case 180bhp

 

[cuprabaz]

180-200 bhp & 200-240lbf-ft torque

 

[cuprabaz]

Damn too slow....

 

[Beaker™]

200bhp/220lbft

unless you take it to a crap dyno operator & it heatsoaks, in which case 180bhp

Thankyou I think a DP/CAT and CAT back are next on the list, that'll surely help out a bit?

 

[Beaker™]

Damn too slow....

lol

 

[m0rk]

APr maps are normally pretty mild, so tend not to flow as much air as more recent remaps, so you may find that it won't improve anything.

 

[Beaker™]

APr maps are normally pretty mild, so tend not to flow as much air as more recent remaps, so you may find that it won't improve anything.

Well i forgot to mention that i should be buying a mates REVO'd ECU after xmas too.......

 

[m0rk]

Then get stage2 revo soon after as well as the DP very different delivery to APR & Revo1

 

[Beaker™]

Yeah that sounds good, what figures would i be looking at then?

 

[m0rk]

It's not all about the figures... with the setup on my gf's car it maxxed the airflow out on both stage1 & 2 (no DP), but stage 2 sustains the power much better, but you lose the low down grunt (there is still LOADS there anyway...) but revs & pulls to 7k easily.

Revo guestimate +15% with stage 2, properly setup, with DP (and preferably an FMIC)

If I were you I'd save the money for a DP, and buy an FMIC. It's such a huge difference - almost like being remapped again.

 

[Beaker™]

Ok matey, thanks for the info. Will get saving

 

[ibizacupra]

it ran a max of 1bar boost for info.

 

[Beaker™]

it ran a max of 1bar boost for info.

 

[Olly20VT]

You could alway use one of these to get some more power mate

clicky

 

[Beaker™]

You could alway use one of these to get some more power mate

clicky

Ahh yeah, forgot about those. How are the 3 that you fitted performing... see any good gains yet?

 

[Olly20VT]

 

[Cupra_Jeff]

Can you imagine adding one of these to an M3 for an extra 15bhp, you could probably wave goodbye to your VANOS while you were installing it !!