• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

Stefal639's car

Stefal639

Guest
Sorry for my bad english, but I think that it should be understandable.

Model:
Seat ibiza special edition 3p (end series of '08)

Engine:
1.4 16v BXW 86cv
Color:
Magic black

Optional:
It was full optional, except 16" wheels that I shouldn't be order because it was finished (Bah, I think they have teased me. sigh)

List of modified parts:

At home, but I have not yet instal
To buy

Engine:
-Dinamic filter BMC DIA,with direct Intake, and artigianal tubation.
-Oil vapour move to a small recovery tank and not to the intake.
-Artigianal silencer with circular end(90 mm) (self made)
[color=#FF0000-silencer with twin exit dx-sx (self made)[/color]

Chassis:
-Coilover raceland
-strut upper bar artigianal
-Strut lower bar artigianal

-Silent block Cupra
-front spacers 16mm
-rear spacers 20mm
-front brake discs tar-ox g88(I win a kit from a tuning newspaper, I wait that they will send me the kit)
-brake tablets tar-ox 114 corsa (up)
-brake fluid dot 4
-brake hoses with metallic braid
-alloy wheel "sport" seat 15" 6,5j et 43
-Pirelli p6 195/55/r15 summer tyres
-Marangoni meteo HP 195/55/r15 winter tyres

External appearance:
-front "spoiler"(I don't know how should you name it in english) from leon cupra
-center front grille in metallic grid with red border (self made)
-dayline 2° model modified with poliellisoidal lent of ford c-max & red interior (self made)
-xenon 6000° kelvin at low beam
-Philps night breaker 4300 K at hight beam
-Philps night breaker 4300 K at fog light
-Red brake calipers (self made)
-External mirrors covered with carbon film (self made)
-Courtesy lights under external mirrors, self made(4 led 6000 K)
-outer uprights covered with carbon film
-Badger "R" simil type-R on uprights(it will be replace with the R of VAG group)
-Plate lights self made(10 led 6000 k)
-Badge of alloy wheels black wit Red S (self made)
-Rear Handle covered with carbon film, and red border (self made)
-Cupra rear bumper
-Side skirt of polo from Rieger


Internal appearance:
-Door pannel with hole for speaker grid, covered with carbon film, and with some red dettail (self made)
-internal handle covered with carbon film
-tweeter triangle with support self made covered with carbon film
-gear frame covered with carbon film
-radio frame covered with carbon film
-Instruments frame covered with carbon film with red circle (self made)
-3 switch at top of the radio frame (self made)
-Red ventilational openings (self made)
-"regulator" of ventilational openings with 3 red points (self made)
-gear leverage shortened by 3 cm (self made)
-Gear Knob seat with red circle and black point (self made)
-Black Mat with red lettering SEAT
-Dais for mat in real carbon with lettering "seat sport" (self made)
-footrest from golf gti
-sport pedals audi

-red sports pedals pilot
-tissue adhesives "seat sport" on seat and central headrest (self made)
-total elimination white interior: (self made)
-uprights blacks
-black sky
-black sunvisors
-black sky handle
-Red handle belt safety (self made)
-ceiling passat w8, covered with carbon film, 32 lled 6000 K
-Courtesy lights on pedals, 8 led 5mm da 6000 k (self made)
-extinguisher in the trunk
-Double bottom covered with black moquette (self made)
-12 mm fan with red led for double bottom

Audio & multimedia:
All of the components are commanded by a car-pc.
The car pc is an old laptop that I dismembered and reassembled without useless stuff(such screen, etc)

Cpu: intel pentium 4 downclock at 1.4 ghz
Ram: ddr 1Gb 600 Mhz
Hd: 250 gb 2.5" Sata
VGA: intel
Scheda Audio: creative soundBlaster Zs
Power and reset are controlled by 2 bypass welded on the motherboard
External link command via ethernet cable modified (8-pole) and serial cable: 4-pole employees(reset and power), 4 are still available
Power supply to be controlled by separate relays of signal "C"
Passage VGA cable, USB jack, 5m driver's side
Driver side sun visor microphone set
HUB usb behind climatronic
VGA 7" touch screen implemented in the radio console
Rear View in the bumper
Windows Xp Ice
Centrafuse 2.0 with my personal skin
Destinator implemented in Centrafuse with europe maps
Bluetooth key for handsfree
Usb-Obd2 for real-time diagnostics
Vag 409.2
Gps key

Front Amplifier Cougar 120W*2
Amplifier Sub Couger 350W*1
Front speaker Coral Monza
Sub Hertz Ex300
Self made bax 22 liter reflex
Cable +12, 4 AWG
Cable ground, 4 AWG
Fuse 50 ampere
Audio cable 3.5 mm



 
Last edited by a moderator:

Stefal639

Guest
15 post for posting photos.
Wait 10 minutes for photos please, I post on th forum ;-)

Ah, if someone can correct my bad english I thank him.
 

Stefal639

Guest
The work of changing poliellisoida cina-made of the dayline with a pair of a ford focus c-max









 
Last edited by a moderator:

tyrer

OEM
Jun 6, 2010
1,991
1
You used ford c-max day running lights on the Ibiza?? Clever that... Very clever.

Seems like a long list
 

Stefal639

Guest
If someone would be kind he should say that He doesn't like this front light...
I hate Cordoba 5p, but I don't permit to say that it is orrible.
 

Stefal639

Guest










new photos...
some news:
vmaxx coilover
voltmeter with home made vtr support
anterior e&posterior brake disk tar-ox f2000
anterior & posterior brake pad tar-ox 112 strada
 
Nimbus hosting - Based solely in the UK.