Spacers on 18 x 8 with coilovers?

jamiebennett81

Guest
I was looking at the car today, and couldn't help but think the wheels could do with spacing out....sitting ever so slightly in the arches

I have fitted a set of 18x8 OZ super L's and KWV1's, which are wound pretty far down

my question is if I space out the wheels 5-10mm, will the wheels rub? the suspension is pretty stiff so not much give in it

does anyone else run a similar setup?

also what is the cost? I presume about £60 per set of spacers (x2) from H&R and the extra length bolts needed to....?
 

Stu_pot

Fire Starter
Mar 26, 2004
374
0
Near Blackpool
Would depend on the offset of the wheels as well. I have 35mm offset with 10mm spacers with no issues.

I have seen 20mm spacers on the rear of Leons with no issues either.

btw I have some H&R 10mm spacers for sale in the classifieds ;)
 

jamiebennett81

Guest
Would depend on the offset of the wheels as well. I have 35mm offset with 10mm spacers with no issues.

I have seen 20mm spacers on the rear of Leons with no issues either.

btw I have some H&R 10mm spacers for sale in the classifieds ;)

ET35 on the OZ's

ok thanks, thats good to know, as I think that is one of my next steps, as the height is just perfect, but the wheels just dont look quite right at the moment
 
SEATCUPRA.NET Forum merchandise