Ram air

[A9_SLU]

I have recently bought a ram air induction kit and have searched on the forum but I was just wondering where you guys have fitted your cold air feeds. I was thinking of fitting it in the front bumper or would this not really be worth doing?? or would I be better off using the existing cold air feed, pictures would be much appreciated. Also where you did guys buy the small filter you need for the pipe going into the air box. I bought a ripspeed one from Halfords but its only 10mm but it does not fit the pipe very well.

 

[p34ch3y]

from the oem one m8 in the arch

 

[A9_SLU]

cheers mate that what i was thinkin seems like alot of work to put the air feed in the front bumper

 

[p34ch3y]

this might helpyou m8

 

[A9_SLU]

Thank you for the photos mate so you have just attached the induction kit cold air feed to the existing one this is what I was planning doing cheers mate. Where did you get the little filter I have circled in ready and does it fit on the pipe with no modification??

 

[Freerider]

I think the dynatwist comes with the filter mate...

It ll be easy to fit the filter mate so dont worry about it too much. We can fit it as said above and if your not happy we ll move it...

 

[A9_SLU]

I think the dynatwist comes with the filter mate...

It ll be easy to fit the filter mate so dont worry about it too much. We can fit it as said above and if your not happy we ll move it...

Cool nice one mate i have a Little ripspeed filter but it does not fit too well