Post your MK2 Leon Power/Torque graph

[AndrewJB]

2008 Cupra K1 with a 3inch downpipe decat and pipercross panel filter. Running on Tesco momentum99

No Mapping?

 

[BraddersThe3rd]

No Mapping?

That's running standard map. Tbh the garage said its would be more like 260bhp on everyday driving. The room we were in was 7 degrees as shown with 100mph winds being fired at the car from a different room . The first run showed around 280bhp but dropped to 275 on the next run due to heat sink.

Edit: forgot to add this was also done 1 week after a full service

 

[AndrewJB]

get some mapping on there now youve got a downpipe so can take Stage2 mapping

 

[BraddersThe3rd]

get some mapping on there now youve got a downpipe so can take Stage2 mapping

I would need to get an intercooler, cold air intake etc first wouldnt I? as at the moment its pretty much standard.

 

[AndrewJB]

CAI would help it, unless your going to track it or drive it super hard everywhere Intercooler will be fine (its got a FMIC as standard)

 

[BIG_Y]

my cupra 2008.

STOCK TURBO
357HP@54KGM
PUMP GAS 98 RON
APR DP
HPFP
APR V3.1
VWR INTAKE
http://www.fastup.co.il/images/29539397.jpg

new dyno.
[email protected].
http://img46.imageshack.us/img46/3792/384hp.jpg

 

[itsmefishy]

 

[big eck]

2010 cupra
Stage 2+ map
3" Milltek cupra R turbo back with sport cat
Evoms intake
Rs4 valve
Autotech hpfp internals
Pro alloy FMIC
Sachs performance clutch

323bhp ATW
372bhp/337lbft

 

[Dingbell88]

Big differences soon ! These figures will look small


Sent from my iPhone using Tapatalk

 

[Tander]

Here is mine:

307BHP
447NM

 

[WeeG]

Seat Leon Cupra R Stage 2+ APR v3.31 with all the bolt ons

 

[Roganjosh]

what are peoples views on this? pd170 with the dpf removed, no aggressive timing etc it pulled 197 on the standard map and bumped it up 10bhp just to smooth it out

 

[James86]

Has anyone use Ecotek in Cheshire? And are the stock internals able to compe with 200hp?

 

[k3yub]

leon cupra mk2

290 bhp
416nm torque

 

[air121005]

Leon Cupra
R-Tech Stage 2
Oversize intake
Turbo muffler delete & Custom full hardpipe setup
Mishimoto FMIC
Trackslag Monster 3.5” Downpipe
Milltek cat-back

335 bhp & 333 ft/lbs

Sent from my iPhone using Tapatalk

 

[gurpz94]

2010 MK2 LCR - Full stage 2+ with all mods. I could have got more power with a more free flowing exhaust but I love the flames and sound of my exhaust - it's a Trackslag 3.5" downpipe with a custom catback.

 

[Kenan]

Facelift MK2 Leon Cupra
Forge Twintake and pre cat removal.
R-Tech remap

 

[Terminator]

What bhp should i expect if i do the following to my 2012 Leon Supercopa tdi?
DPF delete downpipe.
EGR delete.
Backbox gutted.
Inlet manifold cleaned out.
Remapped.

I hope i'll get at least 225bhp on standard turbo with all the above work done..
What else can i do to increase power on standard turbo?
Thanks

 

[Terminator]

What bhp should i expect if i do the following to my 2012 Leon Supercopa tdi?
DPF delete downpipe.
EGR delete.
Backbox gutted.
Inlet manifold cleaned out.
Remapped.

I hope i'll get at least 225bhp on standard turbo with all the above work done..
What else can i do to increase power on standard turbo?
Thanks

Any idea's?

 

[Chris78]

Here's mine

Leon cupra 2011 model.
Stage 1: 317 hp and 427nm torque