my daft window

redgt

Full Member
Mar 4, 2006
118
0
still aint got round to getting it fixed but gettin tired of it not working now so ive decided im gonna sort it out, had a look at it yesterday checked plugs were still in etc. all seemed ok, just had a quite look at the fuses. looking at the tops of them they all seem ok, so im guessing its the window motor? i can get hold of 1 for £50 but im unsure if its the motor or the regulator....

what you reckon?

when i press either of the buttons the passengerside window does nothing, dosent move lightly, dosent make any noise at all. will it be the motor?
any 1 know what fuse is for the passenger side window?


sorry for the essay lol, just dont wanna spend £50 and find its exactly the same..
 

ljbinks

Full Member
Mar 22, 2006
234
0
south wales - pontypridd
i have played about with my window, i had the same problem as you, i took the circuit board off the motor soldered two wires to the motor then got another two wires connected them to a live and earth, then use the two wires i soldered to the motor touch the wires and hey presto it should go down then reverse the wires to the motor and it should go up
it does the job for now until i can get a new regulator
 

redgt

Full Member
Mar 4, 2006
118
0
ahh checked all fuses, there all intact :(
must be the regulator then!

any idea where i can get 1 fairly cheap? what part will be broke? just the motor?
 

taffyR

Full Member
May 15, 2006
84
0
TREALAW/ RHONDDA S.WALES
drivers side window

Same problem,
stripped out motor and sliding gear,
found water had got into regulator/driver card.
unless a scrappy comes to the rescue, looks like im gonna get
stuffed for £100 or so[:@]



IBIZA CUPRA R
240+BHP
312LB FT TORQUE
IHI/MOTEC
LOADS OF OTHER MODS...........

IF YOU GET ANY JOY, LET ME KNOW
ILL DO THE SAME:)
 

Jonzy

Guest
Could always try finding a 11pin reg on the bay, its on my todo list.
 

Jonzy

Guest
Yea, passenger one ground to a halt. Looks like water damage to the pcb.
 
Nimbus hosting - Based solely in the UK.