modules measuring blocks and adaptations

[davidhunter]

Hello all,
I have just spend hours auto scanning through all the modules on my 1.8T Cupra 2003. I have gone through all the measuring blocks and adaptations and have put them into a word document. Question is how do I attach a word document to this message? I cut and paste and it looks rubbish as it looses the formatting.

Also once/ if you see it give me a hand and tell me what I can do with all this data cheers.

David

 

[davidhunter]

Think this might work it did on another site anyway. If you think there are mistakes you can change them and if you understand what half of them are then share and share alike.

Davy

 

[m0rk]

wow - that's some good work there!

 

[davidhunter]

Cheers mOrk,
I had been looking for a list like this for a while and could not find one so thought I would do it myself. I think there are a few mistakes purely down to my own hand writing and some of the abbreviations I am not sure what they mean. I know things like post and pre C are relating to the catalitic converter. Dont know what bin bits is about and there are a lot that say no units. I also wonder how many more there are when the engine is running or are these the only groups used either stage two ignition on or engine fully running? who knows !!

davy

 

[Cupra R]

Interesting read this mate, thanks...

 

[Uwe@Ross-Tech]

http://www.ross-tech.com/vag-com/labels.html



-Uwe-

 

[Simon L]

Nice work mate, thats very usefull.

 

[davidhunter]

Cheers Uwe,
Now as I get better using VAG COM I think I will try and make one of these files for the AUQ 1.8T engine I have a lot to learn first though. I think it would help out a lot of people. Is there likely to be more results showing up in the 4 displays when the engine is running ? or is it OK just to make/ alter a label file from the information when the cars electrics are on but the engine is not started?

Thanks

David

 

[basstard]

I remember uwe posting a similar doc [from tdiclub] with all the TDI engine blocks, does anybody have/knows all the others?

 

[Uwe@Ross-Tech]

David,

You can do 90%+ of the work with the electrics on but engine not running. The only problem with the engine not running is that the data is pretty static. At some point before you publish, make a "reality check" pass through it with the engine running.

You may also find this link useful:
http://www.ross-tech.com/vag-com/m_blocks/index.html


Basstard,

http://forums.tdiclub.com/showflat.php?Cat=0&Number=258487


-Uwe-

 

[davidhunter]

Great help Uwe thanks may rip off your measuring blocks set up looks good like that

Davy

 

[davidhunter]

found another interesting site for teh DTC's
http://1.8t.org/~quattroman/Audi B5...W/OBD/01-19 Diagnostic Trouble Code table.pdf

 

[basstard]

Basstard, http://forums.tdiclub.com/showflat.php?Cat=0&Number=258487
-Uwe-

Yep, I knew that, I remember you posting that a while back ago [see my previous post] but I was asking if someone knew about all measuring blocks for ALL the blocks on a tdi [i.e. not only engine].
I'm concerned about doing a test on mine because I fear for the battery life.

 

[Uwe@Ross-Tech]

Ah, a "TDI" is a type of motor, not a type of car...

I'm not aware of any lists specific to the other systems in an Ibiza.

If you're worried about battery life while "playing", either connect up a battery charger to the mains, or let the engine idle while you play.

-Uwe-

 

[basstard]

Ah, a "TDI" is a type of motor, not a type of car...
I'm not aware of any lists specific to the other systems in an Ibiza.
-Uwe-

Yes, sorry, I was wrong
I thought we were talking about the ibiza [but re-reading 1st post says cupra 2003 so it must be a leon]

 

[davidhunter]

Sorry basstard,
Should have said a Leon Cupra !!

 

[basstard]

.

 

[tji100]

46 - Central Convenience

Anyone have any idea why I cannot connect to control 46 - Cent. Conv. using VAG-COM 311.2 and a serial cable on an 05 Leon FR? I have run a scan and I seem to be able to connect to all the other available controls according to the sticky in this thread but not this one, which is extremely useful!

 

[basstard]

On the same lines, I can't connect to module 35: central locks. The mk3 should have one [it tests it in the auto scan]. It doesn't give any error message,,, it just seems like there ain't a module 35.

Anybosy has a clue?

 

[goble]

yer its through 46 comfort & convenience control unit
only arosa has 35