Logging

[bentaw]

what modules do i log to find out the follwing;

a)if my maf is fubard
b)if my lambda is fubard
c)i have a vacum leak(if this is possibe to log)
d)exhaust gas temps

also for each of the above what am i looking for when i look at the results i already no MAF is g/s isnt and for a revo'd LCR should be 190/205 g/s.

 

[m0rk]

a)if my maf is fubard 004
b)if my lambda is fubard 031 I think
c)i have a vacum leak(if this is possibe to log) 115 & 118
d)exhaust gas temps - can't remember off the top of my ehad

 

[bentaw]

cheers Mark, what am looking at in terms of lamda to see if its fubard i.e what figures or values will be wrong am i looking at high or low figures

 

[Saul]

http://www.seatcupra.net/forums/showthread.php?t=105464

measuring blocks

 

[bentaw]

cool cheers saul, i am only seeing 158g/s now so it must all be down to a fubard MAF the reason why i am running lean,, what am i looking for when looking to see if i have a vacuum leak

 

[gazjones]

if its actual vs requested you need to see figures roughtly the same bit over or bit under. if you graph the results the lines should look the same basically next to each other

 

[bentaw]

not boost leeak a vacuum leak

 

[YerMother]

If you log block 32, this shows idle and part throttle fuelling adaption. A vacuum leak should show as a positive in the second column IIRC

 

[gazjones]

block 115 measures boost just loked at the blocks sorry not seen and vac logs i dont think

 

[bentaw]

cheers yermother