Jabbasport Remap K03s Ibiza

[CatB1]

Very impressed with the remap today.Surprised a few cars and bikes on the journey back to Manchester this afternoon.Weather was 19 degrees so was'nt expecting the results.248.9bhp & 262lb/ft.All done within 3 hours,many thanks to Mike & his team. RR graph below.

Pete

 

[mulletman]

well done mate good results, so how does it feel driving the car now after the ko3

 

[Rick-24]

how come they can do it in like 3 hours? and custom code said it takes 2 days for stage 2?

 

[CatB1]

well done mate good results, so how does it feel driving the car now after the ko3

Surprised how different it feels.K03 (Jabba remap at 200bhp & 234ft/lb)seemed to come on boost earlier and more aggressive but dropped off very quickly.K03s,4bar fpr,Forge TIP & FMIC,Milltek downpipe & exhaust comes on boost & feels like it holds all the way to the red line.Much more fun.

 

[CatB1]

how come they can do it in like 3 hours? and custom code said it takes 2 days for stage 2?

Was originally told it might take all morning & part of the afternoon to map due to problems with the K03s installation(DIY) on some peoples cars eg incorrect vac pipe fitment etc.Jabba would then have to troubleshoot before mapping.Not sure why CC need up to 2 days.Is it that Jabba have been doing it longer?Jabba have a rolling road,CC I don't believe have,does this cut out time required?

Pete

 

[bezzaboy]

the 4 ppl that i know + myself who had their o3s's mapped by jabba all took 6hrs plus to do 1 was diy the rest were fitted down in wales good result

 

[ibizacupra]

CC do have a RR but prefer to log on the road and power test on dyno (when its running again)

CC wont need it for 2 days... do it over 2 days, but with a lot of gaps....

the dynoplot is the old rollers on the plot/graph.
i did'nt think they ran these much these days being just an inertia rr

 

[Madmile]

Very impressed with the remap today.Surprised a few cars and bikes on the journey back to Manchester this afternoon.Weather was 19 degrees so was'nt expecting the results.248.9bhp & 262lb/ft.All done within 3 hours,many thanks to Mike & his team. RR graph below.

Pete

You gotta be happy with that .
Another happy jabba customer sounds like they looked after you which is very good to hear. Glad to see your chuffed.

 

[Copra]

the 4 ppl that i know + myself who had their o3s's mapped by jabba all took 6hrs plus to do 1 was diy the rest were fitted down in wales good result

yea from what i gather the place in wales is about on par with diy?!

 

[Copra]

great results
shows my old ibiza wasnt a "fluke" like some people suggested. performance (1/4miles etc) proved it wasnt though

 

[J@mes]

the dynoplot is the old rollers on the plot/graph.
i did'nt think they ran these much these days being just an inertia rr

thats wat i thought!


mine was mapped on their new rollers in feb!

 

[Rick-24]

so CC take ur car out on the road and thrash the ass off it? lol.... and u get it back with more stone chips than previous

 

[Jonzy]

so CC take ur car out on the road and thrash the ass off it? lol.... and u get it back with more stone chips than previous

Id rather have a car live mapped on the road than on the rollers, everytime.

 

[The_one]

I'd rather have it on the rollers.

On the road there not going to take the car to 100+

Could be dangerous if your on the strip or tracking it etc and your doing 100+ and the car hasnt been mapped correctly for under full load + high inlet temps because you werent able to simulate them situations on the public road

 

[Jonzy]

How little you know

 

[The_one]

You implying that a tuner will want you to drive 100+ on public highway while they map your car?

You'd have to be an idiot to do that,

 

[Copra]

from what ive heard, youd be surprised just how "uncustom" CC actually is!? i cant really comment further because i havent got enough knowledge but thats what ive heard

 

[The_one]

from what ive heard, youd be surprised just how "uncustom" CC actually is!? i cant really comment further because i havent got enough knowledge but thats what ive heard

lol yeah i've also heard they are an official supplier of another type of remap.

strange

 

[Jonzy]

You implying that a tuner will want you to drive 100+ on public highway while they map your car?

You'd have to be an idiot to do that,

I know theyve pushed cars past 170 on public roads to map them to the limiter. These are not shopping carts were talking about, but real power cars.

 

[The_one]

Great stuff.

Take your car for a custom live road mapping session.

Few hundred quid lighter plus the loss of your license