• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

Explain these codes please

Kris

ESTATE! I'm Getting Old!
Nov 21, 2003
808
0
North Essex
Visit site
Hi,

following on from this thread...
http://www.seatcupra.net/forums/showthread.php?t=94411

Can someone please explain these codes

p0571 (16955) - brake switch `A` cir Malfunction

p1128 (17536) - Bank 1 mixture ADAP (multi) too lean

p1539 (17947) - Clutch switch input circuit `f36` implausable signal

p1602 (18010) - power supply (b+) terminal 30 low voltage

p0501 (16885) - vehicle speed sensor A: range perform

Thanks, :cry: :cry:
 

m0rk

sarcasm comes free
Staff member
May 19, 2001
27,787
33
Clanfield, UK
p0571 (16955) - brake switch `A` cir Malfunction your brake switch is broken

p1128 (17536) - Bank 1 mixture ADAP (multi) too lean your lambda sensor is dead


p1539 (17947) - Clutch switch input circuit `f36` implausable signal your clutch switch is broken

p1602 (18010) - power supply (b+) terminal 30 low voltage you've disconnected your battery

p0501 (16885) - vehicle speed sensor A: range perform your speed sensor is periodically up the swanny

I think you have some wiring issues around the pedal box.
 

D3DNA

Full Member
May 14, 2006
391
0
Cov
Not all of them Kris, mainly the "p1128 (17536) - Bank 1 mixture ADAP (multi) too lean".
 

Kris

ESTATE! I'm Getting Old!
Nov 21, 2003
808
0
North Essex
Visit site
ok, so I had the codes cleared and the only 2 that returned are...

p0571 (16955) - brake switch `A` cir Malfunction

p1128 (17536) - Bank 1 mixture ADAP (multi) too lean

I have realised that my car is in fact not going into Limp Mode, because I still get 5-6psi of boost.

Could either of these codes cause my car to feal sluggish and just not right!

Thanks