Documentation on fixing error codes

[coolbanana]

Hi All,

Is there a document or manual on actually fixing error codes.

Thanks

 

[Theresias]

In general the repair manual, but you can also check the Ross-Tech WIKI.

 

[coolbanana]

Great link, unfortunatley the codes I have are not on the list, but I'll be using that site loads.
Cheers Theresias

 

[cupra-c_ya]

what codes do you have?

 

[coolbanana]

Hey Cupra-C,

1) 17925- Main Relay (J271): Electrical Malfunction
P1517 - 35 - 10 --- Intermittent

2) 01008 - Note: Emergency OFF Switch is Active!
35 - 10 --- Intermittent

 

[cupra-c_ya]

has your car had a bump? intermittent faults, try and clear them and see if they come back.

1) main relay, unsure what this is, Im sure someone with more knowledge then me will be along soon......

 

[coolbanana]

"has your car had a bump?"

As in a smash!
Not that I'm aware or can see. I have only had the car for a few weeks and still learning about it.
Loving it though!!!

I'll try clearing the faults tomorrow and see.

Cheers

 

[cupra-c_ya]

the admins on here are good at fault codes mOrk...?

 

[coolbanana]

I see that you have had a Revo map. I have been looking into getting mine mapped.
My yellow beast has a couple of flat spots at about 4k and again at 5.5k.

I have been trying to find out if a revo map is a completely new map or a map on-top of what is curently on the car.
This Q might sound dumb by I'm new to turbo's and cars with diagnostics. I'm old school used to getting the spanners out and not a laptop .

 

[cupra-c_ya]

the ecu is rewritten with revo's code, can be put back to stock (standard performance) at anytime via sps device or revo dealer if asked.

should still pull at 4k but will tail off at higher revs.

 

[coolbanana]

Can you get a standard remap done and then a performance one?

 

[Theresias]

Sadly your codes posting missed control module data, please mention also the control module data from which you pulled these codes and some details on the car - then somebody might able to come up with some suggestions for your fault codes.