CV Boot Kurfufle

[TWR_Jaguar]

Well, took the wheel of this morning to have a look at the wishbone bush and found that the inner cv joint bush had split. Went out to GSF to get the boot kit and a new wishbone, got back and found that it was the wrong one.
The diameter of the old boot was 110mm, and gsf gave me a 100mm one. By the time I found out, they had already closed. So I went to eurocarparts as they were still open and they ordered one in for monday. But having a look at the specs, it says it 136mm in diameter. I'm hopping I'll find that those specs are incorrect.
Does anyone know the correct boot part number and how much it'll cost from Seat themselves.

 

[Fl@pper]

any later VAG i always go genuine

not that dear and at least sure of the right one

 

[TWR_Jaguar]

The Eurocarparts one were also wrong! so went off to the stealership. Seat charged twice as mush but at least it was the right one. After a week on axel stands, I got the right part on Friday. Was ill on sat so did it on sunday and all went well.
Still have to do the other side soon, so will be taking pics and doing a How To. Was a bit impatient to get the car going on Sunday so didn't bother.

 

[adam cupra 20vt]

I put a N/S outer CV gaiter on mine last week......no point going non genuine the proper ones are not expensive