Can Cupra owners help??

[Flyin Scots]

I'm building a mk2 golf with the 20vt transplant and full ibiza cupra electrics.
I have managed to install the loom and i've connected most of it, but i'm stuck and wondered if anyone could help.

I have 2 blank sockets on the bottom of my relay board, one blue one violet (ringed in the pic below)

http://i772.photobucket.com/albums/yy2/E30_2010/Ibizarelayboard2.jpg

Can anyone give me an idea what the loom section that plugs in to those points would be for??

I also have one plug i cannot find anything to fit, the plug comes out of the loom around the same area as the brake switch, (Pics below) anyone any ideas??

http://i772.photobucket.com/albums/yy2/E30_2010/UnknownPlug.jpg
http://i772.photobucket.com/albums/yy2/E30_2010/UnknownPlug2.jpg


Any help would be gratefully recieved

Cheers Andy

 

[Berg]

The second pic, that plug looks like its for the clutch position switch to me as the clutch pedal also has a switch going into it, mine looks identical to that anyway.

 

[Flyin Scots]

Hi thanks very much for the reply, sounds like a damn good call to me :-D
Looks like thats another part to go shopping for lol

Cheers Andy

 

[Flyin Scots]

Hi guys a little update on my qusetions

I have found the section of loom that plugs in to the violet and blue connectors

The loom has 2 plugs on it (x1) flat 3pin and (x1) small rectangular 6 pin. I suspect the loom is for the interior light (rooflight).
3Pin Plug Wiring,
Pin 1 Brown/Brack
Pin 2 Red/ Blue
Pin 3 Brown

I assume that the 6 pin plug is for the electric sunroof and the 3pin is for the light
Can anyone confirm that this is the correct plug for the interior light?


On to problem 2 the unconnected plug, the reply i got from BERG may well be 100% but i'm slightly unsure :S
If you check pic2 from my original post you can see 2 switchs at my fingertips, the blue switch is the brake light switch and from browsing on here the white switch (also a plunger type) sounds like the clutch position switch (unfortunately theres no part number on the switch).
I can say that the white switch has 2 wires goin to it one red/blk and one brown/white
The unconnected plug also has 2 wires to it, one White/red and one Blk/Purple

Can anyone confirm my theory about the white switch??
Can anyone suggest what else connects to the back and purple plug?

Any help would be gratefully recieved

Cheers Andy