Caliper pipe corroded

[CupraRDK]

I have MK1 Cupra R Brembo calipers. On one the metal pipe is corroded. I need to get a new one of these pipes or get a custom braided hose that would replace the metal pipe. I was looking at getting custom brake lines made but don't know what fittings I need on each side of the braided hoses.

 

[Gokiwi64]

Is this for the caliper to brakeline or the hard pipe between the two halves of the caliper ?

 

[CupraRDK]

Caliper to brake line, I tried attaching a photo but it wouldn't let me

 

[Gokiwi64]

Okay so there are a few options out there for braided lines.

https://www.tarox.co.uk/?s=&ymm_sea...EAT&_model=Leon+(1999+2005)+Typ+1M&_year=2005

https://www.awesomegti.com/shop-by-...-4-line-brake-hose-kit-seat-leon-cupra-r-mk1/

https://auto.helperformance.com/seat-leon-1-8-cupra-r-brembo-calipers-2003-2005

You need a certain number of posts (15 I think) before you can post pictures

 

[CupraRDK]

None of here solve my problem, the metal pipe that connects the hose to the caliper is corroded. I either need a new one of those pipes or I need a hose that replaces/bypasses pipe (goes from car straight into the caliper). I could get a custom hose made but don't know the fittings I'll need.

 

[Gokiwi64]

I think I know what you mean now, the hard line that runs from the junction block in the wheel arch to the abs pump ?

So you have the rubber hose from caliper to junction block , then the hard line from the junction block that then run to the abs pump

If thats the case a replacement would be available from any Seats dealer (have a look on here) or failing that I am pretty sure you can get repair kits where you cut of the damaged bit and fit a joiner and new piece of pipe.