BREAKING: 2003 Seat Leon mk1 Cupra R 1.8T - modified
Nicely specced and maintained car with plenty of goodies & modifications to pull off.
Devil Developments mapped - 303bhp
AET K04 turbo
Badger5 ported & polished Chinafold to match turbo
Bosch 550cc injectors
DW65V intank fuel pump
4 bar FPR
Devil's Own meth injection kit with large tank
Airtec front mount intercooler kit
Cobra turbo back decat & V-banded exhaust system
Sachs 4 puck clutch kit
Short shifter
Mocal oil cooler
CM oversized TIP
RamAir cone filter
Custom air filter heatshield and CAI
Custom oil catch can and breather set up
Audi R8 redtop coil packs
10mm phenolic intake gasket
DV relocation pipework
CM silicone boost pipes
Polished intake manifold
Polished engine cover trims
Battery relocation kit
18" Bola B1 shadow chrome alloy wheels
12mm & 20mm wheel spacers F&R
BC coilovers
Fully polybushed suspension
Polybushed dogbone mount
Audi S3 8L front strut brace
BAF rear strut brace
Whiteline rear anti-roll bar
Brembo 4 pot brake calipers rebuilt by BCS a few years ago.
Braided brake lines F&R
Double din centre consoles (genuine)
Leather armrest
Steering wheel, vents & gearstick gaiter with yellow detailing
Recaro 2+2 rear bench with centre armrest / storage
Double pillar pod with Stack gauges (flocked)
Complete car wrapped in 3M gloss yellow
Maxton front splitter (damaged)
Paul Ure rear bumper diffusers
Tinted rear lights
Possibly other bits and pieces I've missed out but I'll update this as and when...
Obviously all the usual Cupra R parts as well including Brembo front brake calipers etc
Message me with your requests for more info & prices.
Parts to be collected from Maidstone, Kent or I arrange post on most stuff except bumpers, panels, engine & gearbox (far too much agro)
And no I won't sell it complete so don't waste my time asking!
Nicely specced and maintained car with plenty of goodies & modifications to pull off.
Devil Developments mapped - 303bhp
AET K04 turbo
Badger5 ported & polished Chinafold to match turbo
Bosch 550cc injectors
DW65V intank fuel pump
4 bar FPR
Devil's Own meth injection kit with large tank
Airtec front mount intercooler kit
Cobra turbo back decat & V-banded exhaust system
Sachs 4 puck clutch kit
Short shifter
Mocal oil cooler
CM oversized TIP
RamAir cone filter
Custom air filter heatshield and CAI
Custom oil catch can and breather set up
Audi R8 redtop coil packs
10mm phenolic intake gasket
DV relocation pipework
CM silicone boost pipes
Polished intake manifold
Polished engine cover trims
Battery relocation kit
18" Bola B1 shadow chrome alloy wheels
12mm & 20mm wheel spacers F&R
BC coilovers
Fully polybushed suspension
Polybushed dogbone mount
Audi S3 8L front strut brace
BAF rear strut brace
Whiteline rear anti-roll bar
Brembo 4 pot brake calipers rebuilt by BCS a few years ago.
Braided brake lines F&R
Double din centre consoles (genuine)
Leather armrest
Steering wheel, vents & gearstick gaiter with yellow detailing
Recaro 2+2 rear bench with centre armrest / storage
Double pillar pod with Stack gauges (flocked)
Complete car wrapped in 3M gloss yellow
Maxton front splitter (damaged)
Paul Ure rear bumper diffusers
Tinted rear lights
Possibly other bits and pieces I've missed out but I'll update this as and when...
Obviously all the usual Cupra R parts as well including Brembo front brake calipers etc
Message me with your requests for more info & prices.
Parts to be collected from Maidstone, Kent or I arrange post on most stuff except bumpers, panels, engine & gearbox (far too much agro)
And no I won't sell it complete so don't waste my time asking!
