brake upgrade seat ibiza/cordoba tdi >2.016v>vr6

[nutzu]

hello , i have a cordoba coupe 1.9tdi (ASV) 110hp made in 2/2000

i want to upgrade the brakes .

now i have 256mm discs brakes in front(not shure) and i want to upgrade them yo 280mm brakes from

seat toleto 2.0 16v

vw golf mk3 2.8vr6

i know that i have to change calipers + supports + brake discs . but i want to know if it is bolt on . the entire brake system with everything ? will fit bolt on ? thanks

and if i will upgrade the brakes from vr6 , the vr6 has 5x100 , and i know that i have 4x100 . i will have to put some 5x100 wheels .

 

[m0rk]

Keep to 280mm 4x100's - bolt on setup.

Take it from the Ibiza Cupra 20VT, Ibiza 2.0 16v & maybe the toledo 16v

 

[nutzu]

the cupra's brakes are too rare and expensive .
i wonder if it will fit the vr6 calipers+ supports whit cupra 1.8turbo 4x100 280mm brakes .
i saw that the toledo 2.0 16v also has 5x100

 

[Dan1.6]

312mm brakes off a tt a3 leon or vrs will fit if machined correctly

 

[truCido]

I've been told that to upgrade from 268 to 280, you only need the 280 carriers and discs of course

 

[nutzu]

thanks for answers

does anyone upgrade the discs whit others oem big brakes ?

the vr6 would be the cheapest solution if the vr6 carriers+calipers will fit on seat ibiza cupra 280mm discs

@ dan : the 312 brakes from leon will fit bolt on on my cordoba ? any threat whit howto ? i'v searched but nothing ....

i also found out that g60 brakes would be a good choice . they also have 280mm . also found out that the vr6 brakes are different then g60 and the pieces woun't fit from one to other setup .

i am still digging in that subject

thank's guys again for answers . cheers

 

[karls cupra]

g60 is cupra mk3 brakes .. 280mm 4 stud 4x100 pattern..

 

[nutzu]

i had 280mm from factory and i did not knew lol ) i discovered when i changed the front discs...